The EOS 5i dp is a versatile, easy-to-use charger with special features for fast charging, discharging and cycling NiCd and NiMH packs of up to 14 cells, Lithium packs to 5S, LifePO4 (A123) cells to 6S and lead-acid batteries to 12V. Charge output cord included.

The EOS 5i DP provides a 'DataPort' for connection to the LBA10 balancer allowing the user to monitor the individual voltages of each battery cell during the charge process. The LBA communicates with the charger, giving notification when balance charging is completed, or when an error is detected and tells the charger to shut down. This insures maximum safety.

The EOS 5i DP, with its max charge rate of 5 ampere, is ready for large capacity lithium packs. The discharge and cycling programs allow you to easily diagnose the condition of your packs, with a Data View mode that conveniently displays detailed information about the charge or discharge cycle.

The JP LiPo 1-3 cell microprocessor-controller charger provides 5 switched output rates (250, 500, 1000, 1500 and 2000 mA). The charger provides feedback using audible warnings for cell count errors and LED lights & beepers for charging status. It also comes with a safety leaflet guiding you through the safe handling of these powerful batteries and chargers. Crocodile clips for 12V connection are also supplied along with a battery lead with BEC connector.

• 1-3 cell Li-Po & Li-Ion charger
• Input voltage: 12V DC
• Selectable output voltage: 3.7V, 7.4V, 11.1V
• Selectable output current: 250-500-1000-1500-2000mA
• Reverse polarity protection circuit included
• Dimension: 125mm x 68mm x 24mm

A 1-4 cell automatic LiPo charger with mains 100V-240V or DC 11V-15V input.

• Designed specifically to charge 1~4 cell Lithium Polymer (LiPo) batteries
• Reverse polarity protection on both DC input and output
• Display Type: Blue LED: 1~3 Cell - Auto Selection; Red LED: 4 Cell - Manual selection
• Microprocessor controlled charging system
• System Protection
• No battery connected
• Reverse polarity of output
• Wrong cell quantity selected
• Voltage error
• Input Voltage error
• Circuitry problem
• Output connection JST connector and 2mm adaptor lead

Download the user manual.

• Input Voltage: 11~15V DC / 100~240V AC
• Battery Type & Cells: Lithium Polymer (Li-Po): 3.7v type ONLY / 1~3 Cell - Auto Cell Detection / 4 Cell - Manual Selection
• Charge Rate: Automatic
  • Minimum charge current: 100mA (0.1A)
  • 1~2 Cell packs 3.0 Amp max
  • 3 Cell packs 2.4 Amp max
  • 4 Cell packs 1.8 Amp max (Max 30W)
• Charge Termination: Constant current / Constant voltage

The JP LiPro Plus is a state-of-the-art 5-in-1 intelligent DC balancer charger. It supports LiPo (1-5 cells), NiMH (1-14 cells), NiCd (1-14 cells) and Gel (2V, 6V & 12V) batteries with a charge rate variable from 0.1 to 5A. There is a built-in LiPo balancer for 2 to 5 cells with individual XH sockets for 2S, 3S, 4S and 5S. XH is the most popular balance connector.

Lipro-Plus 5, not just a charger but also a complete charging and maintenance centre for batteries! Encased in a hardwearing anodized case with a large clear backlit display and a fast and easy to navigate setup programme, you will find this unit easy and a delight to use. Take advantage of the special balance ports and charging program when charging Lithium batteries fitted with the appropriate balance lead and keep your cells in tip-top condition! Comes complete with a selection of popular charge leads to enable you to keep your batteries topped up throughout a long days flying! This charger has a maximum output of 5 amps or 50 watts.