|
|
|
|
|
Hyperion EOS 0403i LiPo Charger with Balancer
The EOS 0403i is the newest balance charger from Hyperion. It can charge lithium polymer and lifePO4 (a123) cells up to maximums of 4S and 3A rates. Made with the beginner in mind and at a low entry price, the 0403i has all of the safety smarts of its bigger brothers, but is extremely easy to use, compact, and is a great addition to any field box.
It's great as a second charger for small to medium lipos. As most flyers are using no more than 4 cells, this charger will be ideal for most needs. Indoor flyers, micro helis, park flyers would find this a great upgrade from the awfull included chargers that are supplied with RTF models. The 0403i has a built-in balancer and is supplied with an adapter board for Hyperion batteries. Adapater boards are available for 90%+ of the available LiPo packs. View the user manual.
£ 40.80
|
|
|
|
Hyperion EOS 5i DP Charger with A123 Support
- Overview:
-
The EOS 5i dp is a versatile, easy-to-use charger with special features for fast charging, discharging and cycling NiCd and NiMH packs of up to 14 cells, Lithium packs to 5S, LifePO4 (A123) cells to 6S and lead-acid batteries to 12V. Charge output cord included.
The EOS 5i DP provides a 'DataPort' for connection to the LBA10 balancer allowing the user to monitor the individual voltages of each battery cell during the charge process. The LBA communicates with the charger, giving notification when balance charging is completed, or when an error is detected and tells the charger to shut down. This insures maximum safety. The EOS 5i DP, with its max charge rate of 5 ampere, is ready for large capacity lithium packs. The discharge and cycling programs allow you to easily diagnose the condition of your packs, with a Data View mode that conveniently displays detailed information about the charge or discharge cycle.
|
Specification:
|
|---|
| Input Voltage: | 11.0-15.0V DC |
| Battery Types: | 1-14 NiCD, 1-14 NiMH, 1-5 Lithium cells (3.7v nominal), 1-6 A123 LifePO4 cells, 1-6 Lead Acid cells (2v per cell nominal) |
| Charge Current: | 0.1A-5A (100mA steps) |
| Discharge Current: | 0.1A-1A (100mA steps) |
| Trickle Charge: | 0-200mA (NiCD/NiMH only) |
| Charge Termination: | "Zero Delta V" peak detection for NiCD/NiMH, "CV/CC" for Lithium & Lead-Acid batteries |
| Cycling modes: | Charge>Discharge & Discharge>Charge (NiCD/NiMH only) |
| Display type: | 2 line, 16 character backlit LCD |
| Dimensions: | 116mm x 84mm x 26mm |
£ 33.65
|
|
|
|
JP LiPo 1-3 CELL 250mA-2A Charger (12V)
- Overview:
-
The JP LiPo 1-3 cell microprocessor-controller charger provides 5 switched output rates (250, 500, 1000, 1500 and 2000 mA). The charger provides feedback using audible warnings for cell count errors and LED lights & beepers for charging status. Crocodile clips for 12V connection are also supplied along with a battery lead with BEC connector.
|
Specification:
- 1-3 cell Li-Po & Li-Ion charger
- Input voltage: 12V DC
- Selectable output voltage: 3.7V, 7.4V, 11.1V
- Selectable output current: 250-500-1000-1500-2000mA
- Reverse polarity protection circuit included
- Dimension: 125mm x 68mm x 24mm
£ 16.00
|
|
|
|
JP LiPro Plus 5 Balancer Charger (12V)
- Overview:
-
The JP LiPro Plus is a state-of-the-art 5-in-1 intelligent DC balancer charger. It supports LiPo (1-5 cells), NiMH (1-14 cells), NiCd (1-14 cells) and Gel (2V, 6V & 12V) batteries with a charge rate variable from 0.1 to 5A. There is a built-in LiPo balancer for 2 to 5 cells with individual XH sockets for 2S, 3S, 4S and 5S. XH is the most popular balance connector.
Lipro-Plus 5, not just a charger but also a complete charging and maintenance centre for batteries! Encased in a hardwearing anodized case with a large clear backlit display and a fast and easy to navigate setup programme, you will find this unit easy and a delight to use. Take advantage of the special balance ports and charging program when charging Lithium batteries fitted with the appropriate balance lead and keep your cells in tip-top condition! Comes complete with a selection of popular charge leads to enable you to keep your batteries topped up throughout a long days flying! This charger has a maximum output of 5 amps or 50 watts.
|
|
More Images:
£ 40.85
|
|
|
|
Blue Arrow 2S/3S LiPo Charger (150mA - 550mA)
The Blue Arrow BA-CH550 is a 2 or 3 cell LiPo charger with built in balancer - JST-XH connector.
It runs off 12V and has switched charge rates of 150, 250, 350, 450 and 550 mAh.
The CH550 can also be used to charge LiPo batteries without a balance connector by using the supplied adapter lead, which connects to the positive and negative battery leads.
£ 16.30
|
|
|
|
Falcon Single Cell LiPo Charger
Falcon single cell LiPo charger with 2 way IDC socket for Falcon power lead. 8-15v input DC.
Fixed 100mAh charge current.
Red LED indicates charging in progress. Green LED - charge complete.
Available with alternative charge connectors to fit Etomic type cells (E-Flite, Parkzone and Kyosho) and a 2 pin polarised plug to fit Micro Invent and cells with similar connector.
- Select charge connector:
| Falcon 2w IDC | £12.95 | 2 Pin Polarised | £13.55 | E-Flite / Parkzone / Kyosho | £13.55 |
|
|
|
|
Didel/Plantraco 'BiCha' Dual Single Cell LiPo Charger
BiCHa is a precision portable charger for 1 or 2 Bahoma lithium polymer cells, or bare lithium polymer cells (e.g. Micro Invent LiPo with MRC lead) at variable rates of 10 mA to 150 mA. It charges two batteries of different capacities and the charger itself can be powered from from 4 AA batteries, or from an external DC supply.
£ 34.65
|
|
|
|
Universal TX/RX NiCd/NiMH Charger
A compact transmitter/receiver mains charger built in to a UK 3 pin plug module. Features protection against short circuit and incorrect polarity connection. Suitable for slow charging RX NiCd/NiMH packs 4.8V (4 cells) and Tx NiCd/NiMH packs 9.6V (8 cells).
Polarity of Tx charge connector is adaptable for positive (Futaba) or negative (JR) centre pin.
- Select type:
| 60mA TX, 60mA RX | £11.50 | 150mA TX, 150mA RX | £12.70 |
The 150mAh version can be used to charge 4 x NiMH cells in the Spektrum DX5e and DX6i by replacing the 3 pin JR/Hitec plug with a DC connector. This is available ready converted:
£ 13.70 . |
|
|
|
|
|
|
|
JP EnErG LiPo 2-5 Cell LiPo Balancer
The JP EnErG Pro LiPo 2-5 Cell Balancer is connected in between
your LiPo charger and the battery being charged. It monitors each cell
and clamps the voltage to avoid over-charging.
Usage is extremely simple - just push the start button on your charger
and the rest is automatic. Charge state is indicated by LEDs on the balancer.
Maximum through charge rate is 7.5 Amps. Directly supports JST-EHR balance leads as used by a small number of battery manufacturers (e.g. Kokam). An optional adapter is available for balancing batteries that have JST XH balance connectors.
Price: £ 14.95
|
|
|
|
Balance Adapter : 2S - 5S JST-XH socket with JST-EHR plug
An 2S to 5S LiPo balance adapter module with JST-XH sockets and JST-EHR plug.
Although the adapter board also has a 6S socket, the plug is only 5S to fit the socket on the EnErG 2-5 Cell LiPo Balancer.
£ 2.55
|
