Home > GWSAPC | Master Airscrew
GWS Propellers
Print version
MicroFly | Reamer for 1.5mm Shaft | MicroSpeed | Direct Drive | Direct Drive Pusher | 3 Blade Direct Drive | SlowFly | GWS 3 Blade SlowFly
Most of the GWS propellers are orange colour but some are also available in black; this is indicated in the selection menu, e.g:
GWS Slowfly Prop 10x4.7 (black)
Unless otherwise specified, these propellers are supplied in units of one. The images contain multiple propellers for illustration only.
Small direct drive propellers to fit motors with 1mm (2.5" props) or 1.5mm (3" props) shafts and suitable for lightweight models. Available sizes: 2.5x0.8 (64x20 mm), 2.5x1 (64x25 mm), 3x2 (82x50 mm) and 3x3 (82x76 mm).
A 1.44mm drill used to open out the hole in GWS MicroFly 3x2 and 3x3 propellers. This eases the task of fitting these propellers to a 1.5mm motor shaft. If props aren't reamed before use, it is possible to push the backplate off of the motor. The factory holes in these props are inconsistent and often way too tight.
GWS microspeed props - sizes 4", 5", 6" and 7". For direct drive on small motors. A suitable collet for mounting these props on a 1.5mm shaft may be found here.
Some items are currently out of stock. Please email if you would like to be notified when they are back in stock.
GWS Direct Drive Propellers
These propellers are reverse pitch (aka pusher) versions of the GWS direct drive props, sizes 3x2, 4x2.5, 5x3, 6x3, 7x3.5, 8x4 and 9x5. They are not made by GWS but are a close match and suitable for twins with opposite rotating props. Available only in black.
GWS 3 Blade Direct Drive propellers. Available in sizes: 5x3, 6x, 7x3.5, 8x4, 9x5 and 10x6 both normal rotation (CCW) and reverse rotation (CW). A pair of CCW and CW props is ideal for counter-rotating props on a twin.
GWS 2 blade Slow Fly propellers from 6" to 15".
GWS 3 blade Slow Fly propellers.
