Royal Mail have announced a significant price increase which takes effect on April 30th. The price increase is too large for us to absorb and so we will have to increase our postal charge to a minimum of £5.00. International, large or heavy items will require additional postage charge; please refer to our Shipping Policy for details.

XQ Control Brushless ESC

A pair of lightweight brushless ESC for 1S and 2S operation. Both may be used with the Spektrum AR6400 receiver module.


 XP-3A 1S Brushless Speed Controller

Description:

A lightweight 3A 1 cell ESC manufactured by XQ Control and sold under various brand names. The dimensions are 13x11x5mm and the ESC weighs 0.7g bare or 1.15g with connectors.

The ESC is programmable via the throttle stick for: brake on/off; timing advance; soft start; LVC cutoff threshold and behaviour (reduce power or stop motor). Download the user manual.

Also available with battery and signal leads weighing 1.45g.

The latest release of firmware for the XP-3A works well with the ESC output on the AR6400.

Specification:
Input voltage:3V-4V (1 lithium cell)
Continuous current:3A
Burst current:4A (max 10 seconds)
Max RPM speed:240,000 (2 poles), 80,000 (6 poles), 40,000 (12 poles)
Size (length x width x height):13x11x5mm
Weight:0.7g without wires and 1.45g with wires
More Images:
XP-3A with Falcon IDC and lightweight battery connectors

Please select the type of signal lead/connector and power lead/connector you require from the menu below. The XP-3A in standard form is supplied with 3 pin connectors for signal/power input and motor output. If a signal lead option is specified, the input connector is removed (to save weight) and the leads soldered directly to the ESC circuit board. The optional JST-ZH, Falcon and AR6400 signal leads are approximately 100mm long. Please call or email if an option matching your connector or lead length requirement is not in the list below. The '2 pin polarised' power connector option is shown here.


Signal and power lead options:
Signal Connector:
no signal lead (standard)£0.00
JST-ZH+£1.05
JST-SH for DT Rx33+£1.50
AR6400+£2.60
Micro Invent MRC3+£1.75
Power Leads/Connector:
no power lead (standard)£0.00
red JST power socket+£0.65
2 pin polarised connector+£1.25
'UM' style Etomic/Parkzone/EFlite/Minium connector+£1.25


Base Price: £ 11.20

The 3 pin 2mm spacing connector to fit the XP-3A is available as a male/female pair: £ 0.70 .

XP-7A 1S or 2S Brushless Speed Controller

Description:

A 1 or 2 LiPo cell ESC weighing 5g with wires and heatshrink or 1.4g in bare PCB form. 2g is possible with lightweight battery and signal leads and the motor soldered directly to the ESC.

Specification:
Input voltage:3V-9V (support 1-2 lithium batteries)
Continuous current:7A
Burst current:9A (max 10 seconds)
Max RPM speed:240,000 (2 poles), 80,000 (6 poles), 40,000 (12 poles)
BEC output:1A /5V
Size (length x width x height):22x12x5mm
Weight:5g with wires and 1.4g without wires
More Images:
Lightended XP-7A with Falcon IDC Connector

The XP-7A is available in lightened form with power and signal leads of your choice. The optional JST-ZH, Falcon and AR6400 signal leads are approximately 100mm long. Please call or email if an option matching your connector or lead length requirement is not in the list below. The AR6400 signal lead version is available in two forms: straight through for 1S operation; and with a diode on the +ve lead for 2S operation. The latter drops the ESC's 5V BEC output to 4.3V for the AR6400.


Signal and power lead options:
Signal Connector:
JR/Hitec£0.00
JST-ZH+£1.05
JST-SH for Dt Rx33+£1.50
AR6400 for 1S+£2.60
AR6400 with diode in +ve lead for 2S+£3.00
Power Leads/Connector:
bare power leads£0.00
red JST power socket+£0.65
lightweight power leads (3A) with 2 pin polarised connector+£1.25
Etomic/Parkzone/EFlite/Minium connector+£1.25


Base Price: £ 11.40

© Micron Radio Control