| 3 Wing Types: | Dual Aileron, V-Tail, and Elevon mixing options available. |
| 5 Point Graphic Pitch Curve: | Allows for adjustments of the pitch of the main rotor blades on a helicopter to optimise each flight mode. |
| 5 Point Graphic Tail Curve: | Allows for adjustments of the pitch of the tail rotor blades on a helicopter to optimise each flight mode. |
| 6 Programmable Airplane Mixes: | Allows for custom mixing of two servos. |
| Active gain control: | Allows for inflight adjustments of the gyro gain settings. |
| Flap Delay with elevator compensation.: | Adjustable control of flap servo speed |
| Language Select: | Allows user to change language displayed on screen; English, Spanish, French, German, and Italian are supported. |
| Low battery voltage warning: | Alerts the user with both an audible and visual warning. |
| Programmable Flap System: | Allows for elevator and flap positions to be programmed for landing and takeoff. |
| Swash plate timing: | Allows for electronic correction of swash plate phasing; Helps helicopter perform better. |
| Telemetry warning screen(Audible/Buzzer): | Provides both tone and vibration alerts. |
| Timer Integrated: | Tracks total on time of transmitter. |
| 3 Airplane Flight Modes: | Allows versatility in programming/set-ups/installations. |
| 3 Programmable Dual Rates: | Allows for three programmable control rates on Aileron, Elevator, and Rudder. |
| 3 Programmable Helicopter Mixes: | Allows for custom mixing of two or more servos. |
| 4 Micro Second Trim Steps: | Changes the servo 4 micro seconds per trim step |
| 4 Swash Plate Types: | Swash plate options to match the particular swashplate of the helicopter. |
| 5 Point Graphic Throttle Curve: | Allows for adjustments of the throttle to optimise engine/motor RPM. |
| Differential: | Precise electronic adjustment of aileron travel when flaperon or elevon wing type is activated. |
| Digital trims with dual speed trim scroll: | Convenience and ease of use. |
| Exponential throw: | Allows for greater control; allows control/stick movements that are less/more sensitive around centre stick position. |
| French Bandwidth Capable: | User enabled bandwidth restriction; Allows for compliance with French regulatory restrictions. |
| Gyro Adjust, Normal, Stunt & Hold: | Allows for separate gyro gain values in each flight mode. |
| Model Copy: | Allows the user to copy model settings from one model memory to another. |
| Model Name: | Allows the user to name each model memory. |
| Model-Reset: | Allows the user to reset each model memory to the default settings. |
| Servo Monitor: | Displays servo movement direction when different programming functions, sticks and/or switches are moved. |
| Servo Reverse: | Provides ability to reverse servo throw from the transmitter. |
| Sub Trim: | The Sub-Trim function allows the user to electronically adjust the centring of each servo. |
| Swash plate expo: | Allows for greater control; allows control/stick movements that are less/more sensitive around centre stick position. |
| Swash Plate Mix: | Allows individual setup of cyclic servos |
| Throttle Cut: | The throttle channel moves to a preprogrammed position (low throttle, low trim) allowing the safe and convenient shut down of the engine. |
| Travel adjust: | The travel adjust function allows the precise end-point adjustment of all six channels in each direction independently. |
| Warning Screen Air: | Provides audible warning to user and does not transmit when certain switches/stick positions are not in their proper locations. (THRO, GEAR, FLAPS, F.MODE) |
| Warning Screen Heli: | Provides audible warning to user and does not transmit when certain switches/stick positions are not in their proper locations. (THRO, STUNT, HOLD) |
