Tiny marvels from this new Chinese manufacturer. The 3.6g servo is available with both standard JR/Hitec/etc. connectors and the smaller (and lighter) JST connectors. The JST connector pinout is compatible with the Blue Arrow and Plantraco receivers and several other lightweight receivers (e.g. Cirrus, Falcon). If you intend using a Blue Arrow JST servo with another manufacturer's receiver please check the connections as these often vary. Please call or email Micron if you are not sure - we can change the connections to match your receiver if you let us know when you place your order.

BA TS-2.5

This is the smallest and lightest servo we offer. It is ideal for lightweight indoor models and the weight can be reduced to less than 2g by removing the lower case and replacing the servo leads with enamelled copper wire. It is available only with a JST connector on a 40mm or 130mm lead.
Spec: 20x8x16mm, 2.5gm, 0.15kg/cm, 0.12sec

BA TS-3.6

Another small servo from Blue Arrow. Ideal for indoor models and small park flyers. Available with JR/Hitec or JST servo connector.
Spec: 20x8x17mm, 3.6gm, 0.3kg/cm, 0.12sec

BA TS-4.3

Not much larger or heavier than the 3.6g, but with considerably more torque at 0.7kg/cm. A good match for the larger indoor model or park flyer. Available with JR/Hitec or JST servo connector.
Spec: 20x8x19mm, 4.3gm, 0.7kg/cm, 0.12sec.

BA TS-6.4

The 'heavyweight' of our Blue Arrow range, but still only 6.4g with 0.8kg/cm torque. Available only with Futaba/JR connectors.
Spec: 21x11x22mm, 6.4gm, 0.9kg/cm, 0.12sec.

Selected for compatibility with Micron receivers, precision engineering and excellent electronics. Manufactured by GWS and Saturn and sold under the J. Perkins 'Supertec' brand.

Titch Digital 4.4g & 5.0g

The latest generation Supertec Digital Titch servo offers sustained power hi-resolution and affordabilty never before seen in such a servo! Available in 4.4g and 5.0g form, both with metal output gears.
4.4g: 19x7.5x15.7mm, 1kg/cm, 0.12sec.
5.0g: 22x9.8x16.2mm, 1kg/cm, 0.12sec.

SuperTec Pico Std

A triumph of micro engineering - it is so small if you blink you will miss it. Suitable for any slow fly, electric or micro helicopter.
Spec: 22.8x9.5x16.5mm, 5.4gm, 0.7kg/cm., 0.12sec.

SuperTec Naro HP

Tiny perfection, perfect for small models.
Spec 22x11.24x21.35mm, 8.8gm, 1.2kg/cm, 0.10sec.

SuperTec Naro MAX/BB

High power and small size.
Spec: 27.0 x 12.7 x 24.65mm, 14gm, 1.8kg/cm, 0.15sec, 1 ball bearing.

JP EnErG Micro 7.5g

A small, but high performance servo suitable for park flyers.
Spec: 24x11.5x23mm, 7.5gm, 1.1kg/cm, 0.10sec.

Micro/BB/MG

High performance high power micro servo. Ideal for building into wings to power ailerons, flaps, elevator, etc
Spec: 28x14x29.8mm, 28gm, 5.4kg/cm, 0.17sec.

Park Flyer

A mini servo with punchy power for small electric aircraft or gliders.
Spec: 30.8x16.2x28.5mm, 18gm, 2.8kg/cm, 0.18sec.

HPXF

The same size as the Park Flyer servo, with a single ball bearing on the output shaft, slightly higher torque (3.0kg/cm) and faster transit time (0.07sec/60deg).
Spec: 30.8x16.2x28.5mm, 19gm, 3kg/cm, 0.07sec.

Mini Std

The new industry standard in mini servos, with an astonishing 3.4kg-cm of torque and .19sec/60 degree transit time. In fact, the new Mini pulls as strongly as the much larger SO3 servo. Use this as a general purpose servo in all aircraft and also in smaller electric models and gliders.
Spec: 35x16.9x32mm, 24.3gm, 3.4kg/cm, 0.19sec.

S03

Standard size servo with metal bushes on output shaft suitable for sport & trainer aircraft, boats & cars. Amazing value for money.
Spec: 39.5x20x36.5mm, 42gm, 3.4kg/cm, 0.23sec.

S03/BB

Standard size servo with double ball race output for smooth precise control of all types of conventional size models. Again, amazing value for money
Spec: 39.5x20x36.5mm, 42gm, 3.4kg/cm, 0.23sec.

S19HPXN/2BB

Fantastic power! This is the ultimate fast servo suitable for all model installations. Pulls a superb 5.4Kg-cm at a blistering speed!
Spec: 40.5 x 20 x 37.5mm, 47gm, 5.4kg/cm, 0.14sec.

S04/BB

Giant power & 10Kg of torque servo suitable for 1/4 scale aircraft, cars, boats & as a sail sheet control servo
Spec: 54.4x26.5x51.5mm, 114gm, 10kg/cm, 0.25sec.