SuperTec Pico Std

A triumph of micro engineering - it is so small if you blink you will miss it. Suitable for any slow fly, electric or micro helicopter.
Spec: 22.8x9.5x16.5mm, 5.4gm, 0.7kg/cm., 0.12sec.

SuperTec Naro HP

Tiny perfection, perfect for small models. Very similar in specification to the Hitec HS-55.
Spec 22x11.24x21.35mm, 8.8gm, 1.2kg/cm, 0.10sec.

SuperTec Naro MAX/BB

High power and small size.
Spec: 27.0 x 12.7 x 24.65mm, 14gm, 1.8kg/cm, 0.15sec, 1 ball bearing.

SuperTec Naro Super Digital Metal Gear

A super strong, fast and powerful small servo.
Spec: 27.0 x 12.7 x 24.65mm, 19gm, 3.6kg/cm, 0.07sec/60°, metal gears and 1 ball bearing.

JP EnErG Micro 6.0g

6g micro high performance servo
Spec: 10x24x19mm, 6gm, 0.9kg/cm, 0.10sec, 4.8V - 5.3V.

JP EnErG Micro 7.5g

A small, but high performance servo suitable for park flyers.
Spec: 24x11.5x23mm, 7.5gm, 1.1kg/cm, 0.12sec, 4.8V - 5.3V.

JP EnErG Digital Micro 7.5g

A digital version of the EnErG 7.5g servo.
Spec: 24x11.5x23mm, 7.5gm, 1.1kg/cm, 0.12sec, 4.8V - 5.3V.

Micro/BB/MG

High performance high power micro servo. Ideal for building into wings to power ailerons, flaps, elevator, etc
Spec: 28x14x29.8mm, 28gm, 5.4kg/cm, 0.17sec.

Park Flyer

A mini servo with punchy power for small electric aircraft or gliders.
Spec: 30.8x16.2x28.5mm, 18gm, 2.8kg/cm, 0.18sec.

HPXF

The same size as the Park Flyer servo, with a single ball bearing on the output shaft, slightly higher torque (3.0kg/cm) and faster transit time (0.07sec/60deg).
Spec: 30.8x16.2x28.5mm, 19gm, 3kg/cm, 0.07sec.

Mini Std

The new industry standard in mini servos, with an astonishing 3.4kg-cm of torque and .19sec/60 degree transit time. In fact, the new Mini pulls as strongly as the much larger SO3 servo. Use this as a general purpose servo in all aircraft and also in smaller electric models and gliders.
Spec: 35x16.9x32mm, 24.3gm, 3.4kg/cm, 0.19sec.

S03N

Standard size servo with metal bushes on output shaft suitable for sport & trainer aircraft, boats & cars.
Spec: 39.5x20x35.6mm, 42gm, 3.4kg/cm, 0.23sec/60°.

S03N/2BB

Standard size servo with double ball race output for smooth precise control of all types of conventional size models.
Spec: 39.5x20x35.6mm, 42gm, 3.4kg/cm, 0.23sec/60°.

S03T/2BB

High torque version of the standard S03/2BB servo. Ideal for control surface operation on large aircraft or rudder operation with fast IC power boats.
Spec: 39.5x20x35.6mm, 46gm, 5.8kg/cm, 0.27sec/60°.

S03T/2BB/MG

An even higher torque version of the S03/2BB servo with metal output gears.
Spec: 39.5x20x35.6mm, 73gm, 7.4kg/cm, 0.33sec/60°.

S19HPXN/2BB

Fantastic power! This is the ultimate fast servo suitable for all model installations. Pulls a superb 5.4Kg-cm at a blistering speed!
Spec: 40.5 x 20 x 37.5mm, 47gm, 5.4kg/cm, 0.14sec.

S9102/2BB

A torquey and speedy low profile servo with twin ballraced output shaft.
Spec: 44.9x22.5x28.8m, 42gm, 2.5kg/cm, 0.16sec.

S04/BB

Giant power and 10Kg of torque servo suitable for 1/4 scale aircraft, cars, boats and as a sail sheet control servo. One ball bearing on output shaft.
Spec: 54.4x26.5x51.5mm, 114gm, 10kg/cm, 0.25sec.