Home > Blue Arrow ServosJP Supertec Servos | Ripmax Servos | Spektrum Servos
Blue Arrow Servos
Print version
Tiny marvels from this Chinese manufacturer. The 3.6g servo is available with both standard JR/Hitec/etc. connectors and the smaller (and lighter) JST connectors. The JST connector pinout is compatible with the Blue Arrow R3P4, Spektrum AR6300 and Plantraco Servo receivers and several other lightweight receivers (e.g. Cirrus, Falcon). If you intend using a Blue Arrow JST servo with another manufacturer's receiver please check the connections as these often vary. Please call or email Micron if you are not sure - we can change the connections to match your receiver if you let us know when you place your order.
BA TS-2.5
This is the smallest and lightest 'standard' format servo. It is ideal for lightweight indoor models and the weight can be reduced to less than 2g by removing the lower case and replacing the servo leads with enamelled copper wire. It is available only with a JST connector on a 40mm or 130mm lead. Spec: 20x8x16mm, 2.5gm, 0.15kg/cm, 0.12sec
BA TS-3.6
Ideal for indoor models and small park flyers. Available with JR/Hitec or JST servo connector. Spec: 20x8x17mm, 3.6gm, 0.3kg/cm, 0.12sec.
BA TS-4.3
Not much larger or heavier than the 3.6g, but with considerably more torque at 0.7kg/cm. A good match for the larger indoor model or park flyer. Supplied with JR/Hitec connector. Spec: 20x8x19mm, 4.3gm, 0.7kg/cm, 0.12sec.
