Falcon 35MHz 'Breeze Block' (size: 36x24x10mm, weight: 4.8g): £53.35 The Falcon Breeze Block system is designed to make installation easy for micro radio controlled models. It includes 2 Falcon servos and a 4 channel receiver all on one board.
	MicroInvent Eco-A 35MHz 3 Channel Receiver with 2A ESC (size: 15x10x6mm, weight: 0.8g): £49.80 Micro Invent's tiny 35MHz 3 channel receiver. Weighs 0.8g (less crystal) and will drive 2 actuators. Has built in 2A brushed motor controller, but will autodetect when a brushless controller is connected to the motor channel. Uses GWS or equivalent half-size crystals.
	MicroInvent Minor 35MHz 5 Channel Receiver with 2A ESC (size: 15x10x6mm, weight: 0.8g): £66.00 Micro Invent's incredibly tiny 35MHz 5 channel receiver. Weighs 0.9g (less crystal) and will drive 2 actuators or 4 servos. Has built in 2A brushed motor controller, but will autodetect when a brushless controller is connected to the motor channel. Uses GWS or equivalent half-size crystals.

	Rx31 DSM2 Ultra Micro Receiver with 2A ESC (size: 9.9x9.3x2mm, weight: 0.23g): £25.00 Rx31 is a DSM2 compatible 4 channel micro receiver without connectors to minimize weight. Channels 1-4 (Throttle, Aileron, Elevator, Rudder) are available as solder pads on the circuit board. The receiver can also support an on-board 2A brushed ESC with motor connection via circuit board pads. The receiver is available with the FET installed and also, in order to save weight when the built-in ESC is not required, with the ESC FET device supplied loose.
	Rx33 DSM2 Micro Receiver with 2A ESC (1mm JST-SH) (size: 15.7x13.3x8mm, weight: 0.65g): £26.00 Rx33 is a DSM2 compatible 6 channel micro receiver with JST-SH connectors. Channels 1-4 (Throttle, Aileron, Elevator, Rudder) have connectors, channels 5 and 6 (Gear, Aux) are available as pads on the circuit board. There is also an on-board 2A brushed ESC with motor connection via circuit board pads. An external ESC may be connected to channel 1 (throttle signal).
	Rx34 DSM2 Micro Receiver with 2A ESC (1.25mm Molex) (size: 16.5x11.7x8mm, weight: 0.68g): £26.00 Rx34 is a DSM2 compatible 6 channel micro receiver with Molex PicoBlade connectors - compatible with servos and ESC designed to fit Futaba micro, Walkera and other receivers that use the 1.25mm pin space connectors. Channels 1-4 (Throttle, Aileron, Elevator, Rudder) have connectors, channels 5 and 6 (Gear, Aux) are available as pads on the circuit board. There is also an on-board 2A brushed ESC with motor connection via circuit board pads. An external ESC may be connected to channel 1 (throttle signal).
	Rx35 DSM2 Micro Receiver with 2A ESC (1.5mm JST-ZH) (size: 17.0x12.1x8mm, weight: 0.71g): £26.00 Rx35 is a DSM2 compatible 6 channel micro receiver with JST-ZH connectors. Channels 1-4 (Throttle, Aileron, Elevator, Rudder) have connectors, channels 5 and 6 (Gear, Aux) are available as pads on the circuit board. There is also an on-board 2A brushed ESC with motor connection via circuit board pads. An external ESC may be connected to channel 1 (throttle signal).
	Rx41 DSM2 Ultra Micro Actuator Receiver with 2A ESC (size: 10.3x9.3x2mm, weight: 0.28g): £26.00 Rx41 is a DSM2 compatible 2 channel micro receiver with one actuator output and built-in 2A brushed ESC. A throttle signal is also available for driving an external ESC.
	Rx42 DSM2 Micro Actuator Receiver with 2A ESC (size: 12.3x11.2x2mm, weight: 0.32g): £27.00 Rx42 is a DSM2 compatible 4 channel micro receiver with two actuator outputs, one servo output and a built-in 2A brushed ESC. A throttle signal is also available for driving an external ESC.
	Rx43 DSM2 Micro Actuator Receiver with 2A ESC (size: 12.3x11.1x2mm, weight: 0.35g): £28.00 Rx43 is a DSM2 compatible 4 channel micro receiver with three actuator outputs and built-in 2A brushed ESC. A throttle signal is also available for driving an external ESC.
	Spektrum AR6400 DSM2 6CH Ultra Micro-Rx (size: 27.8x23.5x8.1mm, weight: 3.9g): £46.15 Spektrum's AR6400 is a 6-channel ultra-micro receiver with integrated servos, speed control and ParkZone's X-Port technology. The AR6400 is designed for ultra-micro and ultra light foamy aircraft. Featuring DSM2 technology, the AR6400 is compatible with all Spektrum, JR, E-flite and ParkZone 2.4GHz DSM2 transmitters. Dimensions (WxLxH): 27.75 x 23.45 x 8.10mm, Weight: 3.9 gram
	Vapor Rx/ESC/Servo Module (PKZ3351) (size: 27.8x23.5x8.1mm, weight: 3.3g): £32.40 Replacement receiver module for the Parkzone Vapor and the fore-runner to the AR6400. The module features two on-board linear servos and a 1.5A brushed motor ESC. Dimensions: (WxLxH): 27.75 x 23.45 x 8.10mm, Weight: 3.3g.

	Plantraco Micro9 0.95g 4 Channel 868MHz Receiver (size: 14x16.5x5mm, weight: 0.95g): £46.80 A 4 channel actuator receiver: 3 actuators and a built-in 2A ESC. Works with the HFX868 transmitter and the Monolith buddy box module. Weighs 0.95g including the patent pending Bahoma connectors and actuator/motor socket connectors. Built-in low voltage protection: motor speed reduced at 2.7V.
	Plantraco Micro9 0.9g 3 Channel 868MHz Receiver (size: 15x16.5x5mm, weight: 0.9g): £39.60 Works with the HFX868 transmitter. This is the most user friendly Plantraco receiver, weighing in at 0.9g including the patent pending Bahoma connectors and .05 pin and socket connectors for 2 actuators and 1 motor output. Pure Digital Radio Link, Built-in low voltage protection.
	Plantraco Micro9 1.1g 4 Channel 868MHz Servo Receiver (size: 23x14x6mm, weight: 1.1g): £32.10 At 1.1 grams, the lightest servo capable micro receiver. This receiver is rock solid pure digital. Smooth action and good range for your Micro R/C models.
	Plantraco Micro9 Butterfly 2 Channel 868MHz Receiver (size: 16x9x3.5mm, weight: 0.38g): £42.60 This is Plantraco's lightest receiver, with the added bonus of the Bahoma battery system - weighing in at approx 0.38g. This receiver has no MicroConnectors but it does have 5mm Bahoma magnets. Output for 1 actuators and 1 motor. Pure Digital Radio Link, built-In low voltage protection. It is suitable only for those who can solder very fine wires.