Get out the fly swatter! This aggressive little beast does not know it shouldn't be able to fly. The kit comes with all the parts required to build with the large top wing (13.8" span pictured) for intermediate pilots or the small top wing (only 10.8"!!!) for the bolder more advanced pilots.

With a 12mm brushless motor and 3x3" or 4x2.5" prop she's a really irate insect or for more sedate flying use the GWS 50XC drive system.

The Micro Bipe weighs in at 4.5 to 5.5 ounces depending on equipment choices. Kit features our ultra-rugged space-frame doublers and inline formers, both Radical R/C innovations in the R/C kit field.

If you're thinking of other motors or CD-ROM setups, the requirements are 20 watts plus and 50mph pitch speed or more. Only the smallest lightest motors should be considered.

• a small receiver - e.g. Corona RS4100II
• two 5gm servos like Pico, Titch 4.4 or Blue Arrow 4.3gm;
• the GWS 50XC drive system and Blue Arrow 5A ESC or for zippy performance a 4000Kv 12mm brushless motor and 10A ESC

A number of options for Radical R/C Micro Bipe may be purchased at discounted prices. Call or email for other options. So-Lite is ideal for covering.

A small model that uses simple gear. The Micro Stick is hot at full throttle, faster than you'd expect, yet the wing loading is that of an indoor flyer. Weighing in at only 100gm, it's hard to believe it only needs your typical park flier gear.

The wing is held on with a simple magnet! So, you can change the battery in a flash.

• a small receiver - e.g. Corona RS410II;
• two 5gm servos like Pico, Titch 4.4 or Blue Arrow 4.3gm;
• the GWS 50XC drive system and Blue Arrow 5A ESC or for zippy performance a 4000Kv 12mm brushless motor and 10A ESC

A number of options for Radical R/C Micro Stick may be purchased at discounted prices. Call or email for other options. So-Lite is ideal for covering.

The Micro Stick in a Low Wing version! The Micro Low Stick flies much larger than it is. Average span is a mere 17 inches, yet she holds normal modern micro gear. Nothing expensive or exotic required to get this bird in the air.

Endowed with landing gear, Spandau machine gun, spoke covers, faux cockpit pad-ring and all the classic stick character. Exhibits updated ultra-rugged space-frame doublers and in-line formers, both Radical R/C innovations in the RC Kit Field. Like most of the Radical R/C kits, 90%+ may be assembled prior to gluing due to the press fit and joinery!

• a small receiver - e.g. Corona RS410II
• two 5gm servos like Pico, Titch 4.4 or Blue Arrow 4.3gm;
• the GWS 50XC drive system and Blue Arrow 5A ESC or for zippy performance a 4000Kv 12mm brushless motor brushless motors and 10A ESC

A number of options for Radical R/C Micro Low Stick may be purchased at discounted prices. Call or email for other options. So-Lite is ideal for covering.

The Mini is a development of the Micro Stick with a longer tail moment, longer wingspan at 23" and is ideally suited for a 12mm inrunner brushless motor.

For those wanting a more tame Mini Stick, it also has very good sport aerobatic power on the GWS 50XC direct drive system. It also flies well on the geared GWS/LPS-RXC-A with a 7x6 prop. You can build it with a Sport/Pylon Racer or with a Sweet Stick/Eindecker styled look.

• a small receiver - e.g. Corona RS410II
• two or three 5gm servos like Pico, Titch 4.4 or Blue Arrow 4.3gm;
• drive system:
  • the GWS 50XC drive system and Blue Arrow 5A ESC
  • or for zippy performance a 4000Kv 12mm brushless motor and 10A ESC
  • or for extreme performance, a small outrunner like the 16gm 2300Kv

A number of options for Radical R/C Mini Stick may be purchased at discounted prices. Call or email for other options. So-Lite is ideal for covering.

Stick 400 is the latest development in Radical R/Cs line of sport models. This model is outstanding on any '400 class' outrunner in the 980-1300 Kv range with 70W - 140W of power. The model is strong enough for 300W if your desire is for insane performance.

This model is everything you expect a Stick to be and everything you expect in a Radical R/C kit. Construction is fully interlocking and completely self jigging. It is actually possible to assemble 90% of the kit prior to applying any adhesive. In fact, most of the assembly is squeezing together friction fit -n- tab self jigged assemblies and applying thin CA sparingly at the conclusion of each assembly. Fit is so good, only the most minimal amount of sanding is needed prior to finish application.

Stick 400 is designed specifically for E-power. Predrilled firewalls are included as is a blank firewall and a shorter nose mounting location if you want to use a glow motor.

Instructions include a complete breakdown on motor system choices and theory for this model. Because it's so light weight, you can fly on a 2S power system. Models have been flown on 2S to 5S.

Das Mini Low Stick is a dream to build and will become your favourite airplane in short order. Outstanding Sport Aerobatic, Touch-n-Go machine, Speedster or WWI Fantasy scale model. Outfit and adorn it to your taste. Landing gear, machine guns, spoke covers and alternate sport or Eindecker wing tips and tail parts included.

For those of you wanting a more tame Mini Low Stick, it flies well on any 12mm motor system. For more aggressive flying, S-300 brushed or brushless options abound. Great fun on a small scale! With 111 precision laser cut parts, it builds so fast you will wish there was more!. 3D Jigsaw puzzle construction and the worlds finest design in one model!

• a small receiver - e.g. Corona RS410II
• two or three 5gm servos like Pico, Titch 4.4 or Blue Arrow 4.3gm;
• drive system:
  • the GWS 50XC drive system and Blue Arrow 5A ESC
  • or for zippy performance a 4000Kv 12mm brushless motor and 10A ESC
  • or for extreme performance, a small outrunner like the Komodo KH-2204-11.

Das Mini Bipe A great handling sport biplane with many innovations. 167 Precision Laser Cut Parts. Finally, a multi-wing model without 'N' struts or flying wires! Quick field assembly with quick snap on top and bottom wings. Special aileron transfer rods attach with magnetic snap as well. You will be prepped for flight before your buddies turn in their first wing bolt!

Build as a Lazy Sunday flier or a sport monster with your brushless system. Includes machine guns and spoke wheel covers for those wanting a custom stand-off WWI look. Easy to fly in space challenged areas like ball fields and local parks. Fast enough to keep up with the big boys at the local club field and slow enough to land like an everyday trainer. Rugged design. Included landing gear means tall grass and runway touch-n-goes are a snap. Get your scarf and goggles on! The mission briefing is just a short build away!

Take a look at the RC Groups build thread - there are lots of useful construction images and notes here to supplement the construction guide supplied with the kit.

• a small receiver - e.g. Corona RS410II;
• three or four 5gm servos like Pico, Titch 4.4 or Blue Arrow 4.3gm;
• drive system:
  • the GWS EPS 300 direct drive
  • or a small outrunner like the TowerPro 2406-32 & 10A ESC.

A number of options for Radical R/C Das Mini Bipe may be purchased at discounted prices. Call or email for other options. So-Lite is ideal for covering.

Finally, a fan model that will ROG on a decent surface and "sport" fly very well too. When you get her airborne you'll find the Mini Hunter is a very well behaved sport aeroplane with sharp looks and good aerobatic ability.

There are lots of cool fan models that require bungee launch or a javelin thrower to get them airborne. Also, most ducted fan models only do one thing well, "go fast". The Mini Hunter is something different. With the stock GWS EDF 40's she'll get off the ground in about 12 feet.

If you can fly any of the other "Stick" models, the Mini Hunter will be a snap for you. Landings are surprisingly slow. Flight times are good with the fans too. The fans are positioned to allow part of the airflow to go over the wing. This gives a model that can still be fast if you want yet can slow down to make very slow fairly high alpha landings without worry of the tail surfaces or the ailerons quiting on you. You see, like a prop driven model, the control surfaces of this model are in the fan thrust airflow.

Setup includes steerable nose gear and Dave's special "Monkey Motion Un-mixer" to un-mix V tail off the tail servos to drive your nose gear steering pushrod. The kit's worth the price just to see how this monkey motion unmixer works! ;-) This is a true "V" tail design. Magnetic pushbutton wing release is used to make battery changing a breeze.

The Mini Hunter may also be powered with direct drive props if you like. Any two 12mm motors will fly it. For brushed use twin 50XC motors, for brushless use two 12mm 4000kv motors. Remember, this model will get off in 12 feet, climb at 45 degrees or better, and is plenty quick with the brushed fans. You do not need brushless to have a cool model here, but we've got it to serve up to those wanting to build a monster.

Take a look at the RC Groups discussion thread - there are lots of useful construction images and notes here to supplement the construction guide supplied with the kit.

• a small receiver - e.g. Corona RS410II;
• two or three 5gm servos like Pico, Titch 4.4 or Blue Arrow 4.3gm;
• drive system:
  • 2 x GWS 40mm fans
  • 2 x GWS 50XC brushed motor set
  • 2 x 12mm 4000Kv inrunner (e.g. Blue Arrow BL-1230 4100Kv)
  • 2 x GWS EDF40 fans + 2 x 12mm 5800Kv inrunner (e.g. Hyperion Y12 5800)
• battery: 2S 400mAh to 3S 1000mAh

A number of options for Radical R/C Mini Hunter may be purchased at discounted prices. Call or email for other options. So-Lite is ideal for covering.

Radical R/C's latest creation for the RC novice or experienced pilot who wants to take someone under their wing. Traditional trainer in a park flier form. Perfect for lazy Sunday cruises, learning to fly or aerobatic practice.

With provided parts, build either the dihedral wing for trainer or flat/straight wing for sport aerobatic. Flies great on 3 or 4 channels. With such low wing loading, you can enjoy gentle thermal riding all day!

Take a look at the RC Groups discussion thread - there are lots of useful construction images and notes here to supplement the construction guide supplied with the kit.

• a small receiver - e.g. Corona RS410II;
• two or three 5gm servos like Pico, Titch 4.4 or Blue Arrow 4.3gm;
• drive system 15W - 70W:
  • GWS 50XC drive system
  • 12mm inrunner brushless, e.g. Blue Arrow BL-1230 4100Kv
  • the GWS EPS 300 direct drive
  • or a small outrunner like the Budget CDROM Pole & Stator 1800Kv & 10A ESC
• battery: 2S 400mAh to 1000mAh

A number of options for Radical R/C Mini Intern Trainer may be purchased at discounted prices. Call or email for other options. So-Lite is ideal for covering.