The Verti-Go 125 sports a symmetrical airfoil and large control surfaces for 3D. The entire kit is tabbed and notched with many alignment dovetails. You can probably get this model framed up in the time it takes just to straighten out the typical ARF.

You'll see a very novel wing attachment method - no rubber bands and no screws of any kind. It pops on and off in seconds with no tools or parts to lose. The Verti-Go 125 has a light wing loading yet has superb flying characteristics. Wing span 35", weight 400gm - 500gm.

Although designed for a motor/gearbox, Verti-Go 125 is easily adapted to take a firewall mounted outrunner. Several models are flying on the Scorpion SII-3008-1090.

The E-Hornet can take anything from a 6V Speed 400 to a hot brushless. You can power it for extreme speed or make it a real pussy cat of a sport plane. The E-Hornet with high power and the addition of a folding prop is very much like a Hot-Liner without the price tag.

With a 6V Speed 400 or the TowerPro 2406-32 it's a nice sport plane. The wing area and airfoil produce an extremely wide speed envelope. Install the TowerPro 2409-12 and get the best of both worlds: 200W for effortless aeros yet docile slow-speed. The kit has over 110 laser cut parts. 37" wingspan, 100mph+ speed rated if you wish, weight is 375 to 500 gm depending on motor/battery setup.