Micro Racer printed pylon racer kits.
10-inch Wingspan, flying weight of about 12 grams,
flying speed is 2 - 4 m/s approximately.
Very stable models that can
handle winds outdoors and are fantastic for indoor Micro Pylon Racing.
Get one - you'll be addicted!
You must install the Micro9 3CH receiver, 2 MicroActs, 7mm motor
with either the 57x22 prop or the Tri-Turbofan prop,
and of course you need the HFX868 Tx and LP90 cells.
The kit includes a laser cut depron airframe,
control horns, Z bends and figure 4's, carbon fibre control rods,
carbon fibre fuselage stiffener, motor reinforcments
and landing gear (shoestring only): £ 9.70
P51 Invader
|
P51 Miss America
|
Shoestring #16
|
Shoestring Yellow Jacket
|
