The core of every homemade brushless motor, the GoBrushless and Komodo stators are made from high-quality iron laminations. All of the stators can be stacked to build larger motors. The insulation material can be removed if desired, but this is not necessary as it does not effect the performance of motors in which stacked stators are used.

OD: 17.8mm, ID: 5.5mm, thickness: 4mm insulation: high temperature enamel coating. As used in the Mini GBx kit.

OD: 20.2mm, ID: 7.0mm, thickness: 4.9mm insulation: removeable nylon endcaps

As used in the GBx kits.
OD: 22.7mm, ID: 7.9mm, thickness: 4.5mm, insulation: high-temp heavy poly-nylon coating

OD: 25.0mm, ID: 9.3mm, thickness: 1.7mm insulation: high-temp enamel coating

OD: 25.0mm, ID: 9.3mm, thickness: 1.7mm insulation: high-temp enamel coating

As used in the KH-257 kit.
OD: 22mm, ID: 10mm, thickness: 4mm, insulation: green epoxy

As used in the KH-278 and KH-283 kits.
OD: 23.8mm, ID: 9.7mm, thickness: 6.6mm, insulation: green epoxy

As used in the KH-257 kit.
OD: 27mm, ID: 25.7mm, centre hole: 3.17mm, weight: 5.5g

Cut from the same hardened steel used to manufacturer laser assembly guide rails for CD-ROM drives, these shafts are extremely strong. Engineered for use with the GoBrushless GBx motors, these shafts feature an M3-threaded end for prop mounting and are c-clip secureable. Available in two lengths: 65mm and 75mm (click on links for a detailed view).

3.17mm diameter hardened steel shaft suitable for all Komodo Motors (KH-2204, KH-2208, KH-2407 & KH-2413). Length 44.8mm, weight 2.5g.

Made from the same hardened steel as HSS drill bits, these shafts are ideal for motors and gearboxes.

Sealed miniature ball bearings in a selection of sizes:

N50 magnets in a variety of sizes. Please get in touch if you don't see the size you need.

Some items are currently out of stock. Please email if you would like to be notified when they are back in stock.

Set of curved N48M magnets for the Komodo KH-278 and KH-283 motor kits using 23.8mm stators. Available as a pair in case you break a magnet or in full sets of 12 pieces.

High quality magnet spacers for Komodo motor kits. They are used to position the magnets in the end-bell before applying glue (don't forget to remove the spacer before dripping CA behind each magnet!). Please select the correct spacer for your motor and number of magnets.

Designed to take the guess work out of magnet arrangement. These magnet spacers are laser-cut from high-density plastic, are CA-resistent, and can be used, reused, and used again! Available in 22.7mm diameter to suit the GBv and GBx motors (or custom 12 magnet pole motors using 22.7mm stators) and 20mm diameter for motor built using the GoBrushless 20mm stator.

Note: the current GBv and GBx kits do not require a magnet spacer as the magnets are pre-fitted to the motor can.

Magnet wire in a variety of useful metric sizes. Nearest SWG equivalent is listed, see this table for AWG conversion. All reels are 20mtrs - plenty for experimentation.

The Komodo PCB strengthens the connection point between the motor magnet wire and the silicon wire. It prevents breakage of the copper magnet wires through bending or movement. The PCB fits all Komodo stick mount motor kits and can also be used on other motors that have an 8mm bearing tube. Download the documentation.