Micro Model Motors
4mm x 11mm Coreless Motor - 13ohm £2.90Motor for GB05 gearbox with 42mm wire lead length and about 1.5mm tinned ends of wire. As used on Butterfly RTF's and other models that use the GB05 gearbox. Weight 0.65gm and with 0.7mm shaft. Coreless motor. Good match with the Micro Butterfly propeller, or GB05 gearbox or hundreds of other projects.
4mm x 8mm Coreless Motor - 11ohm £2.75A 4mm dia x 1mm length coreless motor designed for 3V operation. Weight 0.52gm and with 0.6mm shaft and 60mm leads.
GWS B2C Motor £5.15GWS CN12-B2C 12mm diameter motor. Specifications: voltage - 4.5V, RPM (no load) - 23700, shaft size - 1mm, weight - 5.6g. Suitable for use in the GWS LPS gearbox.
GWS CN08 Motor £5.35GWS CN08 8mm diameter motor. Specifications: voltage - 4.5V, RPM (no load) - 24500, shaft size - 1mm, weight - 3.4g.
GWS CN10 Motor £3.70GWS CN10 10mm diameter motor. Specifications: voltage - 4.5V, RPM (no load) - 17000, shaft size - 1mm, weight - 5g.
Plantraco 6mm Coreless Motor - 4.5ohm £3.60These are great little workhorses, the same motor used in the GB03 and GB04 gearboxes. These motors have long 60mm leads with a 1.27mm (0.05") pin space connector for easy installation. 0.8mm shaft, weight 1.34gm, 6mm diameter 4.5Ohm coreless motor.
Plantraco 7mm Motor £3.607mm coreless motor, available in 1.7ohm and 3.3ohm. These are great little motors, direct replacements for the SS Blue (1.7ohm) and SS Orange (3.3ohm). They have a micro connector pre-installed. These motors have long 60mm leads for easy installation. 1mm shaft. 2.9gm.
Vapor Main Motor £6.10Replacement 6mm 3ohm coreless motor for Parkzone Vapor and Night Vapor. Complete with 2 pin 1.27mm spacing connector.
Falcon PU01 Power Unit £16.3012mm conventional core motor with CNC cut 5:1 gearbox. 1mm dia steel prop shaft. Mass complete with 136mm dia propeller = 11gm. 40gm static thrust at 4,200rpm on 2S LiPo.
Falcon PU05 Power Unit £16.307mm dia. coreless motor with CNC cut acetyl 6.5:1 gear box. 1mm steel shaft. Supplied with a GWS 5"x3" prop. Thrust 18-20g on 1 LiPo cell. 450mAh current consumption.
Falcon PU06 Power Unit £16.30Conventional core motor power unit with CNC milled Delrin 3.25:1 gear box. 1mm steel shaft. Supplied with GWS 5"x3" prop. Mass 8.6g. Approx. 40g+ thrust with 2 LiPo cells (7.4v). Approx. 9000rpm.
GWS LPS-B2C Motor/Gearbox £11.10GWS LPS (Light Power System) dual ball bearing gearbox with B2C motor and spinner. Available with 3 different ratios: A 4.0:1, B 5.0:1 and C 6.2:1.
Parkzone P-51 Motor and Gearbox £12.50Replacement 8.5mm coreless motor and gearbox for Parkzone Micro P-51D. Gearbox output shaft is 1.5mm with a threaded end. Motor is fitted with 2 pin 1.27mm spacing connector.
Plantraco GB03 Motor/Gearbox £10.806mm 4.5ohm motor + gearbox. 5.25:1 gear ratio - 0.25 mod gears, 1mm shaft. Long motor leads 6cm and terminated with .05 pin connector. Good for props measuring 4 - 6 inches. Pulls about 200mA or so - depends on the load. 2.29 grams total weight.
Plantraco GB04 Motor/Gearbox £10.806mm 4ohm motor + gearbox. 5.78:1 gear ratio - 0.25 mod gears, 1mm shaft. Terminated with .05 pin connector. Good for props measuring 4 - 6 inches. Pulls about 200mA or so - depends on the load. 2.6 gm total weight.
Plantraco GB05 Motor/Gearbox £12.804mm 13 ohm motor + 5:1 gearbox with 0.2 mod gears. Draws about 150mA with the 3233 CF prop attached. Weight with motor is 0.86 grams excluding prop adapter and prop. GB05 includes a prop adapter but no prop.
Plantraco GB07 Motor/Gearbox £10.807mm 1.7 ohm motor + 5:1 gearbox. Good thrust with GWS 5" props. Weight with motor is 3.82 grams excluding prop adapter and prop. Output shaft is 1mm and suitable prop adapters are available.
Vapor Gearbox £4.10Replacement 6:1 gearbox for Parkzone Vapor and Night Vapor. Does not include motor. Output shaft is 1mm diameter with threaded end to fit the Vapor prop.
10g Micro Brushless Motor (2000Kv) £9.25This motor is ideal for indoor or lightweight outdoor models (e.g. the Stevens Aero 'Diddle' and Parkscale Whim ranges). With only 9.2gms weight and a decent 40w of power it spins a 6x5 to 7x3.5 props with ease gives 140gm of thrust.
2g Micro Brushless Motor (7700Kv) £12.75An amazing micro size brushless motor for 1 cell LiPo. Thrust is approx 20g with a Plantraco TriTurbo prop.
5g Micro Brushless Motor (2000Kv) £9.95This motor is ideal for indoor models of 50g-70g auw. With only 5.2gms weight and 20w of power it spins a 4x2.5 to 5x3 prop giving 80gm of thrust.
AP03 £18.75A superb 3g outrunner for 1S (7500Kv) or 2S (4000Kv) operation. Ballraced shaft for smooth running and long life. Ultra-light stator for fast response - ideal for micro-sized 3D models.
AP05 Micro Brushless Motor £19.95A 5g motor designed for 1S and 2S operation with winds of 3000Kv and 5000Kv. With a GWS 5x3 prop, the 3000Kv motor gives 45g thrust on 1S or 110g on 2S.
E-Flite Park 180 Outrunner Motor 2200Kv £27.00The Park 180 motor (2200Kv) is designed to deliver quiet clean power for 3D flyers weighing 55 to 85gms, scale electric flyers of 85 to 170gms or any model that may require up to thirty watts of power.
Gasparin/Potensky Bronco 12W £36.00A lightweight brushless motor designed for single cell use - 3.5V - 4.0V. Weight: 7.0g. Thrust: 90g (at 3.5V on GWS 5x3 propeller).
Gasparin/Potensky Grizzly 14W Brushless Motor £36.00A lightweight brushless motor designed for two cell use - 7.4V. Weight: 7.0g. Thrust: 100g (at 7.0V on GWS 5x3 propeller).
Potensky POT-20W £25.50A small brushless motor for 2-3 LiPo cells. Supplied with fixed and wobbly prop adapters and a firewall mount.
