A selection of connectors suitable for small and micro size models.
|
|
|
|
|
0.8mm Gold Plated Bullet Connectors (5 pk)
Lightweight 0.8mm gold plated bullet connectors, ideal
for micro models. Each connector pair weighs 0.35g. Good for 5A continuous current. Supplied as a pack of 5 pairs including heatshrink tube.
£ 3.55
|
|
|
|
2mm Gold Plated Bullet Connectors (5 pk) - Lightweight
Lightweight 2mm gold plated bullet connectors, ideal
for lightweight models. Good for 20A continuous current.
Supplied as a pack of 5 pairs including heatshrink tube.
£ 3.55
|
|
|
|
2mm Gold Plated Bullet Connectors (5 pk) - Standard
2mm gold plated bullet connectors, ideal
for lightweight models. Good for 20A continuous current.
Supplied as a pack of 5 pairs including heatshrink tube.
£ 3.55
|
|
|
Click on image for a larger version.
|
Vapor Battery Charge / Receiver Power Lead
A 50mm lead with socket which mates with the connector on a Vapor 70mAh,
Blade mCX 110mAh and Kyosho Minium
LiPo cells.
Can be used for charging or using the LiPo to power a non Parkzone receiver.
£ 1.05
|
|
|
Click on image for a larger version.
|
Vapor Multiple Battery Charge Lead
An adapter lead to allow you to charge multiple
Vapor 70mAh or
Blade mCX 110mAh
LiPo cells on a standard LiPo charger.
Two versions of the adapter are available with 2 or 3 LiPo sockets wired to a 2S or 3S JST-XH balance connector.
Plug the JST-XH into your balancer or charger/balancer and the red/black charge leads into the charge ports, then connect your Vapor or Blade mCX batteries and charge them in series.
Select type:
|
|
|
Click on image for a larger version.
|
Lightweight ESC Cable with 2 Pin Polarised Connector
Power lead with polarised connector.
Used for ESC, receiver or charge leads. Lead length: 50mm; max current: 2A;
weight 0.35g.
£ 0.85
|
|
|
Click on image for a larger version.
|
Lightweight Battery Cable with 2 Pin Polarised Connector
Power lead with polarised connector.
Used for batteries. Lead length: 50mm; max current: 2A;
weight 0.35g.
£ 0.85
|
|
|
Click on image for a larger version.
|
Minature 2 Pin Polarised Power Connector
A mating pair of lightweight polarised 2-pin power connectors useful for battery to ESC (or receiver) wiring.
Max current: 2A, weight: 0.09g.
£ 0.85
|
|
|
|
|
|
|
Click on image for a larger version.
|
Micro Brushless Motor Connector
A lightweight 0.1" 3 pin plug and socket for use on brushless motor to ESC connections.
Gold plated turned pins and precision
gold plated sockets are good for 3A.
Supplied with a selection of heatshrink to protect
the soldered joints.
£ 1.20
|
|
|
Click on image for a larger version.
|
Motor Lead for AR6400 Brushed ESC
A 2 pin connector and 100mm lead to fit the brushed motor socket on Spektrum's AR6400.
£ 1.75
|
|
|
|
|
|
Also, see JST-ZH and JST-SH.
|
|
MPC3
A pair of 3-pin male connectors to mate with
MRC3. MPC3 is the same connector as
used on the MINOR receiver outputs.
Supplied with a length of heatshrink tube. Max current: 1A, weight: 0.016g.
£ 1.45
|
|
|
|
MRC3
A pair of 3-pin female connectors to fit the Micro Invent MINOR and MINOR FLAT receiver outputs.
Supplied with a length of heatshrink tube. Max current: 1A, weight: 0.038g.
£ 2.75
|
|
|
|
MRC3S
Servo lead with bare ends for converting your existing servos
or speed controller.
Length: 50mm; max current: 1A; weight: 0.15g.
£ 2.75
|
|
|
|
MRC3R
An adapter lead to allow servos and ESC to be
plugged into the MINOR receiver without changing connectors. The lead
has a MRC3 connector at one end and a JR/Hitec/Futaba plug at the other end.
Length: 50mm; max current: 1A, weight: 0.4g.
£ 3.55
|
|
|
Click on image for a larger version.
|
ESC Lead for AR6400
A 3 pin connector and 100mm lead to fit the ESC socket on Spektrum's AR6400.
The wire is 32awg PTFE insulated and the yellow dot on the connector indicates the side that should be uppermost when inserted into the AR6400 ESC socket.
£ 2.60
|
