An amazing micro size brushless motor for 1 cell LiPo. Thrust is approx 20g with a GWS 3x2 prop.

The motor has plain bushed bearings (no ballrace) so it needs frequent but light oiling. The XP-3A 1S ESC is an ideal match.

Max current: 2A KV: 7700 RPM/V Size: 10mm dia, 25mm long Weight: 2g Shaft dia: 1mm Recommended cell count: 1s Lipo Recommended prop: GWS 3x2

Some performance data: Prop Current(A) Thrust GWS2510 1.3 14.5g GWS0320 1.26 19.8g U-80 1.68 23.4g MCF3222 1.72 24.6g

This motor is ideal for indoor models of 50g-70g auw. With only 5.2gms weight and 20w of power it spins a 4x2.5 to 5x3 prop giving 80gm of thrust.

Motor is supplied with a motor mount.

Max current:	3A
KV:	2000 or 3000 RPM/V
Size:	14mm dia, 25mm long (incl mount & shaft)
Weight:	5.2g
Shaft dia:	1.5mm
Recommended cell count:	2s Lipo
Recommended prop:	4x2.5 to 5x4.3

A good motor for 1S operation on a 3x3 or 4x2.5 prop.

Motor is supplied with a motor mount.

Power:	20W
Max current:	2.5A
KV:	5100 RPM/V
Size:	14mm dia, 25mm long (incl mount & shaft)
Weight:	6g (incl mount)
Shaft dia:	1.5mm
Recommended cell count:	2s Lipo
Recommended prop:	1 cell: 3x3 or 4x2.5, 2 cell: 3x2

This motor is ideal for indoor or lightweight outdoor models (e.g. the Stevens Aero 'Diddle' and Parkscale Whim ranges). With only 9.2gms weight and a decent 40w of power it spins a 6x5 to 7x3.5 props with ease gives 140gm of thrust.

Motor is supplied a motor mount, prop adapter and a prop saver.

Max current:	6A
KV:	1800, 2000 or 2900 RPM/V
Size:	18mm dia, 30mm long (incl mount & shaft)
Weight:	10g
Shaft dia:	2mm
Recommended cell count:	2s Lipo
Recommended prop:	7x6 to 8x4.3 (1800Kv), 6x5 to 7x3.5 (2000Kv), 4x2.5 to 5x5 (2900Kv)