Micro Invent's incredibly tiny 35MHz 5 channel receiver. Weighs 0.9g (less crystal) and will drive 2 actuators or 4 servos. Has built in 2A brushed motor controller, but will autodetect when a brushless controller is connected to the motor channel. Uses GWS or equivalent half-size crystals.

Dimensions: 15x10x6mm. Max ESC current: 2A. Voltage range: 2.7V - 5.5V. Flying lead power cable with MRC connector.

Download the manual

A flat version of the Micro Invent Minor receiver - connectors are inline with the PCB instead of standing vertically. The Flat weighs 0.15g less than the standard Minor and has the same actuator/servo drive capability.

The Flat does not have the flying lead power cable and requires power to be supplied via one of the output connectors - e.g. from the BEC output of a speed controller.

A micro sized actuator with pre-installed centering magnet and connector. Specifications:
- 80 ohm coil resistance
- 0.4 g-cm torque @ 3.6 volts
- 7x8x4 mm dimensions
- 0.4g weight
- 20g typical model weight

A mini sized actuator with pre-installed centering magnet and connector. Specifications:
- 85 ohm coil resistance
- 0.8 g-cm torque @ 3.6 volts
- 9x10x8 mm dimensions
- 0.75g weight
- 30g typical model weight

A mini sized double arm actuator with pre-installed centering magnet and connector - ideal for aileron control. Specifications:
- 85 ohm coil resistance
- 0.8 g-cm torque @ 3.6 volts
- 9x10x6 mm dimensions
- 0.75 gram weight
- 30g typical model weight

A larger actuator with pre-installed centering magnet and connector. Specifications:
- 68 ohm coil resistance
- 1.8 g-cm torque @ 3.6 volts
- 9x10x6 mm dimensions
- 1.25g weight
- 40g typical model weight

A larger double arm actuator with pre-installed centering magnet and connector - ideal for aileron control. Specifications:
- 68 ohm coil resistance
- 1.8 g-cm torque @ 3.6 volts
- 9x10x10 mm dimensions
- 1.25 gram weight
- 40g typical model weight