Royal Mail have announced a significant price increase
which takes effect on April 30th. The price increase is too large for us
to absorb and so we will have to increase our postal charge to
a minimum of £5.00.
International, large or heavy items will require additional postage charge;
please refer to our
Shipping Policy for details.
|
|
|
These balance adapter modules are fitted as standard with a 6S (7 pin) JST-XH or JST-EH plug. JST-XH is the most common type of balance connector; JST-EH is the socket on Fusion chargers and balancers. Please contact us if you need an alternative connector fitting.
|
Click on image for a larger version.
|
2S - 6S JST-XH Balance Adapter
A 2S to 6S LiPo balance adapter module with JST-XH sockets and 6S JST-XH plug on the end of a 75mm lead.
Other connectors can be fitted to the lead for use with other chargers - please enquire.
Select type:
Some items are currently out of stock. Please
email
if you would like to be notified when they are back in stock.
|
|
|
Click on image for a larger version.
|
2S - 6S Thunder Power / Flight Power Balance Adapter
A 2S to 6S LiPo balance adapter module with Thunder Power / Flight Power sockets and 6S JST-XH plug on the end of a 75mm lead.
Other connectors can be fitted to the lead for use with other chargers - please enquire.
Select type:
|
|
|
|
|
|
A selection of JST-XH plug, sockets and leads for adding balance connectors to non-balanced batteries or for making adapter and extension leads.
|
Click on image for a larger version.
|
JST-XH Plugs
Connector shells and crimp terminals to make up JST-XH balance plugs. Supplied with spare crimp terminals in case you loose or wreck one or two. Available in 2S, 3S, 4S, 5S and 6S. The image shows a 2S (3 pin) connector and crimp terminals. The connectors are ideally made up using the correct crimp tool - a servo connector crimp tool will work. Alternatively, they can be soldered - care must be taken to ensure that solder does not wick into the spring part of the terminal.
Select type:
Some items are currently out of stock. Please
email
if you would like to be notified when they are back in stock.
|
|
|
Click on image for a larger version.
|
JST-XH Sockets
JST-XH sockets with solder pins - ideal for making up balance extension and adapter leads. Available in 2S, 3S, 4S, 5S and 6S. The image shows 2S, 3S and 4S (3, 4 and 5 pin) sockets.
Select type:
Some items are currently out of stock. Please
email
if you would like to be notified when they are back in stock.
|
|
|
Click on image for a larger version.
|
JST-XH Balance Leads
A 120mm lead with JST-XH plug for adding a balance lead to a non-balanced LiPo or for making an adapter lead. The wire is flexible and suitable for 5A. Available in 2S, 3S, 4S, 5S and 6S. The image shows a 5S lead.
Select type:
Some items are currently out of stock. Please
email
if you would like to be notified when they are back in stock.
|
|
|
Click on image for a larger version.
|
JST-XH 2S Balance to JST Power Charge Adapter Lead
An adapter lead to charge a 2 cell LiPo battery with red JST power plug from a charger with only a JST-ZH balance output socket.
Use the 2S (3 pin) balance output connector on your charger. The JST-XH plug is wired with the two most negative leads connected together to prevent the balancer from shutting off.
£ 1.45
|
|
|
|
|
|
The JST-PH balance connector is used on small E-flite LiPo batteries and the E-flite Micro Beast.
|
Click on image for a larger version.
|
JST-PH to JST-XH 2S Charge Adapter
An adapter to allow 2S LiPo batteries fitted with the 3 pin JST-PH connector to be charged from a charger or balancer that has JST-XH connectors.
The 120mm red/black leads are for connecting to the charger main output. If your charger has only the JST-XH balance socket, then these leads may be cut off.
£ 2.15
Temporarily out of stock. Please
email to register interest.
|
|
|
|
|
|
|
Click on image for a larger version.
|
HP/PQ to JST-XH
These adapter leads allow you to charge a Hyperion or Polyquest battery from a charger/balancer that has the JST-XH connector. The lead a HP/PQ socket at one end and a JST-XH plug at the other end. Available in 2S, 3S, 4S, 5S and 6S (the image shows the 3S lead).
Select type:
Some items are currently out of stock. Please
email
if you would like to be notified when they are back in stock.
|
|
|
|
|
|
|
Click on image for a larger version.
|
ThunderPower/FlightPower Socket to JST-XH Plug
These adapter leads allow you to charge a Thunder Power or Flight Power battery from a charger/balancer that has the JST-XH connector. The lead is approx 100mm and has a TP/FP socket at one end and a JST-XH plug at the other end. Available in 2S, 3S and 4S (the image shows the 3S lead).
Select type:
Some items are currently out of stock. Please
email
if you would like to be notified when they are back in stock.
|
|
|
Click on image for a larger version.
|
JST-XH Socket to ThunderPower/FlightPower Plug
These adapter leads allow you to charge a battery with JST-XH balance connector from a charger/balancer that has a Flight Power or Thunder Power socket. The lead is approx 100mm and has a TP/FP plug at one end and a JST-XH socket at the other end. Available in 2S, 3S and 4S (the image shows the 3S lead).
Select type:
Some items are currently out of stock. Please
email
if you would like to be notified when they are back in stock.
|
