Please see the notice at the top of this page about shipping of LiPo cells.

40mAh Lithium Polymer cell with with built-in protection circuit and 20mm wires..

Continuous Discharge Current: 0.4A

Size (l x w x h)	Weight
15 x 12 x 4 mm	1.2 gm

This LiPo is optionally fitted with a 2 pin connector. Please select from the menu below if you want a connector fitted:

Connector:

none, bare wires £0.00 Molex Picoblade (UM) +£1.00 JST-ZH, pin 1 positive +£1.00

Please see the notice at the top of this page about shipping of LiPo cells.

70mAh Lithium Polymer cell with with built-in protection circuit and 20mm wires..

Continuous Discharge Current: 0.7A

Size (l x w x h)	Weight
22 x 15 x 4 mm	2.4 gm

This LiPo is optionally fitted with a 2 pin connector. Please select from the menu below if you want a connector fitted:

Connector:

none, bare wires £0.00 Molex Picoblade (UM) +£1.00 JST-ZH, pin 1 positive +£1.00

Please see the notice at the top of this page about shipping of LiPo cells.

100mAh Lithium Polymer cell with built-in protection circuit and 35mm wires.

Continuous Discharge Current: 1A

Size (l x w x h)	Weight
27 x 11.8 x 3.9 mm	2.05 gm

This LiPo is optionally fitted with a 2 pin connector. Please select from the menu below if you want a connector fitted:

Connector:

none, bare wires £0.00 Molex Picoblade (UM) +£1.00 JST-ZH, pin 1 positive +£1.00 Molex 2mm, pin 1 negative +£1.00

Please see the notice at the top of this page about shipping of LiPo cells.

150mAh Lithium Polymer cell with built-in protection circuit and 35mm wires.

Continuous Discharge Current: 1.5A

Size (l x w x h)	Weight
25 x 20 x 4 mm	3.8 gm

This LiPo is optionally fitted with a 2 pin connector. Please select from the menu below if you want a connector fitted:

Connector:

none, bare wires £0.00 Molex Picoblade (UM) +£1.00 JST-ZH, pin 1 positive +£1.00 Molex 2mm, pin 1 negative +£1.00

Please see the notice at the top of this page about shipping of LiPo cells.

150mAh Lithium Polymer cell with built-in protection circuit and 35mm wires.

Continuous Discharge Current: 0.15A

Size (l x w x h)	Weight
30 x 12 x 5 mm	3.2 gm

This LiPo is optionally fitted with a 2 pin connector. Please select from the menu below if you want a connector fitted:

Connector:

none, bare wires £0.00 Molex Picoblade (UM) +£1.00 JST-ZH, pin 1 positive +£1.00 Molex 2mm, pin 1 negative +£1.00

Please see the notice at the top of this page about shipping of LiPo cells.

220mAh Lithium Polymer cell with built-in protection circuit and 35mm wires.

Continuous Discharge Current: 2.2A

Size (l x w x h)	Weight
40 x 12 x 5 mm	4.4 gm

This LiPo is optionally fitted with a 2 pin connector. Please select from the menu below if you want a connector fitted:

Connector:

none, bare wires £0.00 Molex Picoblade (UM) +£1.00 JST-ZH, pin 1 positive +£1.00 Molex 2mm, pin 1 negative +£1.00

Please see the notice at the top of this page about shipping of LiPo cells.

A 270mAh single cell LiPo with cylindrical form factor, ideal for fitting into long, thin spaces (e.g. model railway wagon or carriage).

Discharge up to 15C (4A) and charge up to 5C (1.35A).

Length: 56mm, diameter: 8mm, weight: 6gm

Continuous Discharge Current: 4.05A

Size (l x w x h)	Weight
56 x 8 x 8 mm	6 gm

Please see the notice at the top of this page about shipping of LiPo cells.

A 300mAh 20C single cell LiPo with small form factor and a high discharge rate. Molex 2mm connector with pin 1 negative.

Continuous Discharge Current: 6A

Size (l x w x h)	Weight
34 x 18 x 7.5 mm	9 gm

This LiPo is optionally fitted with a 2 pin connector. Please select from the menu below if you want a connector fitted:

Connector:

Molex 2mm, pin 1 negative +£1.00

Please see the notice at the top of this page about shipping of LiPo cells.

300mAh Lithium Polymer cell with built-in protection circuit and 35mm wires.

Continuous Discharge Current: 1.5A

Size (l x w x h)	Weight
31 x 20 x 5 mm	6 gm

This LiPo is optionally fitted with a 2 pin connector. Please select from the menu below if you want a connector fitted:

Connector:

none, bare wires £0.00 Molex Picoblade (UM) +£1.00 JST-ZH, pin 1 positive +£1.00 Molex 2mm, pin 1 negative +£1.00

Please see the notice at the top of this page about shipping of LiPo cells.

320mAh Lithium Polymer cell with built-in protection circuit and 35mm wires.

Continuous Discharge Current: 3.2A

Size (l x w x h)	Weight
35 x 25 x 4 mm	6.9 gm

This LiPo is optionally fitted with a 2 pin connector. Please select from the menu below if you want a connector fitted:

Connector:

none, bare wires £0.00 Molex Picoblade (UM) +£1.00 JST-ZH, pin 1 positive +£1.00

Please see the notice at the top of this page about shipping of LiPo cells.

A 600mAh 25C single cell LiPo with small form factor and a high discharge rate.

Continuous Discharge Current: 15A

Size (l x w x h)	Weight
40 x 26 x 10 mm	17 gm

Please see the notice at the top of this page about shipping of LiPo cells.

600mAh Lithium Polymer cell with built-in protection circuit and 35mm wires.

Continuous Discharge Current: 3A

Size (l x w x h)	Weight
35 x 20 x 9 mm	12 gm

This LiPo is optionally fitted with a 2 pin connector. Please select from the menu below if you want a connector fitted:

Connector:

none, bare wires £0.00 JST-ZH, pin 1 positive +£1.00 Molex 2mm, pin 1 negative +£1.00

Please see the notice at the top of this page about shipping of LiPo cells.

A 650mAh single cell LiPo with cylindrical form factor, ideal for fitting into long, thin spaces (e.g. model railway wagon or carriage).

Discharge up to 15C (9.75A) and charge up to 5C (3.25A).

Length: 46mm, diameter: 13.5mm, weight: 13gm

Continuous Discharge Current: 9.75A

Size (l x w x h)	Weight
46 x 13.5 x 13.5 mm	13 gm

Please see the notice at the top of this page about shipping of LiPo cells.

A 750mAh 35C single cell LiPo with small form factor and a high discharge rate.

Continuous Discharge Current: 26.25A

Size (l x w x h)	Weight
43 x 24 x 9 mm	18 gm

Please see the notice at the top of this page about shipping of LiPo cells.

A 1200mAh 1S (3.7V) LiPo with JST-PH connector and internal protection circuit limiting discharge to 1C.

Continuous Discharge Current: 1.2A

Size (l x w x h)	Weight
48 x 33 x 6 mm	20.5 gm

This LiPo is optionally fitted with a 2 pin connector. Please select from the menu below if you want a connector fitted:

Connector:

JST-ZH, pin 1 positive +£1.00 Molex 2mm, pin 1 negative +£1.00 JST-PH for model R/C, e.g. UMX (Micron standard) +£1.00 JST-PH for robotics, Adafruit, etc. +£1.00

Please see the notice at the top of this page about shipping of LiPo cells.

A 2000mAh 1S (3.7V) LiPo with JST-PH connector and internal protection circuit limiting discharge to 1C.

Continuous Discharge Current: 2A

Size (l x w x h)	Weight
49 x 34 x 10 mm	33 gm

This LiPo is optionally fitted with a 2 pin connector. Please select from the menu below if you want a connector fitted:

Connector:

JST-ZH, pin 1 positive +£1.00 Molex 2mm, pin 1 negative +£1.00 JST-PH for model R/C, e.g. UMX (Micron standard) +£1.00 JST-PH for robotics, Adafruit, etc. +£1.00

Please see the notice at the top of this page about shipping of LiPo cells.

2000mAh Lithium Polymer cell with built-in protection circuit and 35mm wires.

Continuous Discharge Current: 10A

Size (l x w x h)	Weight
50 x 34 x 10 mm	33.6 gm

This LiPo is optionally fitted with a 2 pin connector. Please select from the menu below if you want a connector fitted:

Connector:

none, bare wires £0.00 JST-ZH, pin 1 positive +£1.00 Molex 2mm, pin 1 negative +£1.00 JST-PH for model R/C, e.g. UMX (Micron standard) +£1.00 JST-PH for robotics, Adafruit, etc. +£1.00