A lightweight plastic gearbox suitable for use with either GWS LPS motors or 12mm brushless motors. Available in ratios: 4:1 and 6.2:1.

A well machined aluminium gearbox with pinion to fit any IPS/LPS size motor (including the 12mm inrunner brushless motors). Weighs 14g including spinner. It also has the normal stick mount fitting on the back to accept a 10mmx5mm stick. Available in ratios: A 5.86:1, B 7:1, C 8.6:1, D 9.66:1, E 10.7:1, F 11.7:1, S1 4.14:1 and S2 3.5:1

An excellent firewall combination motor mount and heat sink. Works with EPS 50XC motors and 12mm brushless motors. Aluminium, 5 grams. Mounts to firewall with provided fasteners. Motor installs and removes easily with clamping action/fastener. (motor/prop is for illustration only)

Clip on heatsink for IPS type motors (12mm diameter).

A quality CNC manufactured firewall motor mount. Supplied with two M3 x 3 screws and M2.5 x 8 screws Net Weight: 3.5gm. This mount can be used for KH-257, KH-278, KH-278 V.2, KH-283 V.2 (stick style) motors or other 8mm bearing tube motor.

This CNC machined stick motor mount is designed for to fit a 10x10 mm wood stick and 8mm bearing tube motors. It can be used for KH-257, KH-278, KH-278 V.2, KH-283 V.2 (stick style) motors or other 8mm bearing tube motor. Net Weight: 3.5gm (Including screws)

A versatile tube mount that can accept a wide range of motors. Available in two versions with 8mm and 10mm tubes.

At one end of the tube is a clamp that is tightened by a screw - this will grip the bearing tube of most CD-ROM style motors. A removable plate which fits into the clamp part of the tube allows radially mounted motors to be fixed.

8mm: the outside diameter of the tube is 10mm & the inside diameter is 8mm. The removable mounting plate is 24mm diameter and is pre-drilled to accept many types of motor - most will fit straight on with no modification.

10mm: the outside diameter of the tube is 12mm & the inside diameter is 10mm. The 44mm diameter mounting plate mount has concentric circles marked on it making it easier for you to drill your holes in the correct location.

This high quality plywood CNC cut mount is designed to adapt radially mounted outrunners to the GWS 10mm stick. The mounting plate is drilled to allow most popular motors to be mounted: it has 3mm holes on 16mm, 19mm and 25mm pcd. It is supplied as a kit and requires thin CA for assembly. (The motor is shown for illustration only).

Fits 1.5mm motor shafts (e.g. GWS 50XC and 12mm brushless motors) and has 2mm prop shaft. The 2mm shaft fits into a black plastic collar to adapt to 4mm bore props. Other sizes can easily be adapted. Lets you easily bolt on many props such as GWS 4x2.5,4.5x3 etc. (motor and prop are for illustration only).

A plastic collet style adapter that fits 1.5mm motor shafts and props with a 4mm centre hole. It is simply pushed on and the precision laser cut form is a surprisingly tight fit. Price is for a pack of 3. (motor and prop are for illustration only)

A prop saver style adapter for 1.5mm shafts, supplied with one o-ring. The prop in the image is for illustration only and is not included with the prop saver.

Solidly engineered collet prop adapters by Protech or Radical R/C. Available in various sizes: 2mm, 2.3mm, 3mm, 3.2mm, 4mm and 5mm.

Domed nut collet prop adapters for 3mm and 5mm motor shafts with 6mm and 8mm prop shafts.

A prop saver style adapter for 3mm shafts, supplied with one O-ring. A pack of 10 spare O-rings is available.

This Prop-Saver Adapter is the same one that is included with 2205, 2208 and 2212 series Scorpion Brushless motors. Machined from high-quality aluminium bar stock, it is designed to fit on a 3mm motor shaft, and comes packaged with 2 rubber O-rings.

One side of the adapter has a tapered boss with a maximum diameter of 6mm and the other side has a tapered boss with a maximum diameter of 5.5mm. The Scorpion prop-saver adapter weighs 2.0 grams by itself, and 2.4 grams with one of the O-rings installed.

It can be used on any brushless motor with a 3mm shaft, and is recommended for use on motors of 200 watts or less. The O-rings are substantially stronger than those found on other prop saver products, but they are easily damaged by sharp prop edges. We recommend that you remove the sharp edge of the prop where the O-ring fits.

This propeller saver is a match for the 3.17mm shaft an Komodo motors. The price includes propeller saver hub, O-ring, screws, 7mm adaptor and 8mm adaptor.

It can be used for GWS HD, GWS SF, APC E and APC SF propeller. A pack of 10 spare O-rings is available.