The E-flite Control Line Timer has been designed to deliver control of an R/C ESC for use in an electric control line or free flight model. The timer has a very low weight of only 3.2 grams and is very compact in size. The timer is programmable and has a second function for controlling other features on your model such as retractable landing gear.

View the user manual.

Flight Line Plans have recognised that many traditional free flight modellers have an interest in indoor flying during the winter season but some do not have the experience of either radio control or other forms of electric flight. To simplify matters a complete pre-wired and ready-to-go electric free flight system is provided, which will encourage an initial entry into this new specialty with a high degree of success. All components are designed for use with the Electronic Profile Controller.

A 7mm 3.3ohm coreless pager motor with GWS 2.5x0.8 propeller. Fitted with connector pins ready to use with the EPC.

A single cell 50mAh Lithium Polymer battery fitted with a 60mm lead and 2 pin polarised connector ready for use with EPC.

Must be charged using a dedicated single cell LiPo charger using a charge current of 50mAh. Use the charge lead with your charger.

Also take a look at the Full River LiPo cells.

A 150mm lead with 2 pin polarised connector suitable for connecting your single cell LiPo charger to the 50mAh LiPo or other LiPo cells with similar connector. Similar to the Micron Lightweight Battery Cable with 2 Pin Polarised Connector.

A pair of connector pins and heatshrink tube for adapting an existing motor for use with EPC.