Corona make a series of small single and dual conversion 4/6/8 channel receivers with long receiving range and DSP decoders for noise/glitch elimination. In version 2 form, these receivers have even better performance: increased range and higher IP3 for good adjacent channel rejection. All receivers feature dual tuned RF front-ends and dual matched 4 pole ceramic IF filters.
Corona receivers are compatible with FM/PPM R/C transmitters and operate on 4.8V~6V. The single conversion receivers require micro size crystals and the dual conversion receivers require Futaba compatible normal sized DC crystals . The synthesized receivers require no additional crystals. They are locked to your transmitter using a push button on the side of the receiver - this only needs to be done once, the receiver remembers the frequency and returns to it when switched on. The 6 and 8 channel synthesized receivers all provide failsafe.
Click on image for a larger version.
RS410II : 4 channel single conversion 35MHz receiver
A micro sized 4 channel single conversion receiver
which takes a micro size crystal .
Full range, despite its
small size and low weight.
For indoor and small outdoor models, we recommend use with a
Micro Antenna .
Number of channels: 4 Size: 28.5 x 15 x 7.4mm Weight: 4.7g (without shrink wrap) Sensitivity: about 2.0uV Selectivity: ±8kHz at 65dB down
£ 11.70
Temporarily out of stock. Please
email to register interest.
Click on image for a larger version.
RS610II : 6 channel single conversion 35MHz receiver
A tiny and lightweight 6 channel single conversion receiver
which takes a micro size crystal .
Full range, despite its small size and low weight.
Number of channels: 6 Size: 36 x 18.7 x 8.2mm Weight: 6.8g Sensitivity: about 2.0uV Selectivity: ±8kHz at 65dB down
£ 12.50
Click on image for a larger version.
RS810II : 8 channel single conversion 35MHz receiver
A tiny and lightweight 8 channel single conversion receiver
which takes a micro size crystal .
Full range, despite its small size and low weight.
Number of channels: 8 Size: 36 x 22 x 8.6mm Weight: 8.0g Sensitivity: about 2.0uV Selectivity: ±8kHz at 65dB down
£ 13.55
Click on image for a larger version.
RD620II : 6 channel dual conversion 35MHz receiver
A tiny and lightweight full-range 6 channel dual conversion receiver
which takes a Futaba compatible normal sized
DC crystal .
Number of channels: 6 Size: 38 x 20.7 x 8.4mm Weight: 8.2g Sensitivity: about 2.0uV Selectivity: ±8kHz at 65dB down
£ 18.15
Click on image for a larger version.
RD820II : 8 channel dual conversion 35MHz receiver
A tiny and lightweight full-range 8 channel dual conversion receiver
which takes a Futaba compatible normal sized
DC crystal .
Number of channels: 8 Size: 38 x 22.3 x 8.5mm Weight: 8.6g Sensitivity: about 2.0uV Selectivity: ±8kHz at 65dB down
£ 19.15
Throw away your crystals! The Corona synthesized receivers are small and lightweight yet provide excellent range and noise rejection via their DSP decoder. The 4 channel RP4S1 is the lightest commercial synthesized receiver. The 6 and 8 channel receivers all provide failsafe - the servos move to preset positions in the event of signal loss.
Click on image for a larger version.
RP4S1 : 4 Channel Synthesized 35MHz Single Conversion Rx
The 4 channel Corona RS4P1 is the smallest and lightest synthesized
35MHz receiver available today.
A simple, one button control is used to lock the R4PS1 to the
frequency of your transmitter.
This only needs to be done once, the R4PS1 remembers the frequency and
returns to it when switched on.
The micro sized R4PS1 is a full range receiver despite its small size and low weight. For indoor and small outdoor models, we recommend use with a Micro Antenna .
Number of channels: 4 Frequency range: ch55 - ch90 Size: 32 x 17 x 7mm Weight: 5.4g Sensitivity: about 2.0uV Selectivity: ±8kHz at 65dB down
£ 19.35
Click on image for a larger version.
RP6D1 : 6 Channel Synthesized 35MHz Dual Conversion Rx
A small and lightweight 6 channel dual conversion synthesized 35Mhz receiver with failsafe.
Number of channels: 6 Frequency range: ch60 - ch90 Size: 40 x 20 x 12mm Weight: 7.2g Sensitivity: about 2.0uV Selectivity: ±8kHz at 65dB down
£ 24.45
Click on image for a larger version.
RP8D1 : 8 Channel Synthesized 35MHz Dual Conversion Rx
A small and lightweight 8 channel dual conversion synthesized 35Mhz receiver with failsafe.
Number of channels: 8 Frequency range: ch60 - ch90 Size: 40 x 24 x 12mm Weight: 9.2g Sensitivity: about 2.0uV Selectivity: ±8kHz at 65dB down
£ 25.50
Click on image for a larger version.
RS410II-40 : 4 channel single conversion 40MHz receiver
A version of the RS410II for 40MHz. Ideal for motorising many
plastic boat kits by Revel, Airfix, etc.
This receiver requires a micro size crystal .
For small models, we recommend use with a 40MHz Micro Antenna .
Number of channels: 4 Size: 28.5 x 15 x 7.4mm Weight: 4.7g (without shrink wrap) Sensitivity: about 2.0uV Selectivity: ±8kHz at 65dB down
£ 11.70
Click on image for a larger version.
RS610II-40 : 6 channel single conversion 40MHz receiver
A version of the RS610II for 40MHz.
This receiver requires a micro size crystal .
Number of channels: 6 Size: 36 x 18.7 x 8.2mm Weight: 6.8g Sensitivity: about 2.0uV Selectivity: ±8kHz at 65dB down
£ 12.50
Click on image for a larger version.
RD620II-40 : 6 channel dual conversion 40MHz receiver
A version of the RD620II for 40MHz.
This receiver requires a Futaba compatible normal sized
DC crystal .
Number of channels: 6 Size: 38 x 20.7 x 8.4mm Weight: 8.2g Sensitivity: about 2.0uV Selectivity: ±8kHz at 65dB down
£ 18.15
Click on image for a larger version.
RP4S1 : 4 Channel Synthesized 40MHz Single Conversion Rx
The 4 channel Corona RS4P1 is the smallest and lightest synthesized
40MHz receiver available today.
A simple, one button control is used to lock the R4PS1 to the
frequency of your transmitter.
This only needs to be done once, the R4PS1 remembers the frequency and
returns to it when switched on.
The micro sized R4PS1 is a full range receiver despite its small size and low weight. For indoor and small outdoor models, we recommend use with a Micro Antenna .
Number of channels: 4 Size: 32 x 17 x 7mm Weight: 5.4g Sensitivity: about 2.0uV Selectivity: ±8kHz at 65dB down
£ 19.35
