A 50mm lead with socket which mates with the 1.25mm pin space connector on a Vapor 70mAh, Blade mCX 110mAh and Kyosho Minium LiPo cells. Can be used for charging or using the LiPo to power a non Parkzone receiver.

An adapter lead to allow you to charge multiple 'UM' single cell LiPo - e.g. Vapor 70mAh or Blade mCX 110mAh LiPo cells on a standard LiPo charger. Two versions of the adapter are available with 2 or 3 LiPo sockets wired to a 2S or 3S JST-XH balance connector. Plug the JST-XH into your balancer or charger/balancer and the red/black charge leads into the charge ports, then connect your Vapor or Blade mCX batteries and charge them in series.

Some items are currently out of stock. Please email if you would like to be notified when they are back in stock.

A short adapter lead to allow batteries with 'MBC' style 2 pin polarised connectors to be used with receivers that have a 'UM' type power socket (e.g. AR6400, PKZ3351. Lead length: 25mm; max current: 2A; weight 0.35g.

A 3 pin JST-PH connector and 75mm red/yellow/black power lead to fit the battery socket on Spektrum's AR6400LBL.

Use this lead to convert your LiPo for use with the AR6400LBL. If your LiPo has only 2 connections (no centre tap), you can easily remove the centre yellow wire. This lead has the same connector as used on E-flite's 120mAh and 180mAh LiPo batteries and is compatible with the battery socket on the E-flite Micro Beast.

A short adapter lead to allow 2S Lipos with the red JST 2 pin plug to be used with Spektrum's AR6400LBL.

A 2 pin connector and 100mm lead to fit the brushed motor socket on Spektrum's AR6400 or Vapor receiver module.

A 3 pin connector and 100mm lead to fit the brushless motor socket on Spektrum's AR6400LBL.

A 3 pin connector and lead to fit the ESC socket on Spektrum's AR6400.

The wire is 32awg PTFE insulated and the yellow dot on the connector indicates the side that should be uppermost when inserted into the AR6400 ESC socket. Available in 100mm and 250mm lengths,.

5 pack of 3 pin shell and 4 crimp terminals (one spare) to make a servo connector compatible with receivers that use JST-SH 1mm pin spacing connectors - e.g. Spektrum AR6400 and Falcon Receiver.

5 pack of 3 pin servo sockets compatible with the 1mm pin spacing sockets on the AR6400 receiver. It can be used to add sockets for channels 4 and 5 to 'green dot' versions of the Parkzone PKZ3351) (Vapor/Ember receiver module).

Although the socket is surface mount, it is possible to attach thin wires to construct an extension lead. The soldered connections must be protected with heatshrink sleeving.

A JST-SH servo lead compatible with the 1mm pin spacing sockets on the AR6400 receiver and Falcon 4 channel receiver. The lead is made with lightweight 32awg PTFE coated wire and has a plug at one end and bare leads at the other.

Available in 100mm and 250mm lengths.

A JST-SH servo extension lead compatible with the 1mm pin spacing sockets on the AR6400 receiver and Falcon 4 channel receiver. The lead is made with lightweight 32awg PTFE coated wire and has a plug one at one end and a socket at the other.

Available in 100mm and 200m lengths - the image shows the 100mm lead. Weights: 100mm - 0.5gm, 200mm - 0.7gm. Other lengths can be made to order, please contact Micron with your requirement.

This extension lead can be used with Falcon receivers, but the wire colours are incorrect (negative and signal leads reversed).

Some items are currently out of stock. Please email if you would like to be notified when they are back in stock.