These are great low cost, high quality cdrom type motors. They are ideal for shockflyer or parkflyer type use, with 2 or 3 lipo cells. Made from high quality components to a high standard. These have to be among the best value motors around!

Kv	Imax	Prop	Thrust
1300	9A	3S: 8x4.3	350gm
1500	11A	3S: 7x6	450gm
1800	13A	3S: 6x4	420gm
3000	12A	2S: 6x5	400gm

Size:	27mm dia, 28.5mm long, 8mm dia mounting tube
Weight:	24g
Shaft dia:	3mm

A micro motor suitable for small light indoor models this is a very popular motor designed for use on two LiPo cells. Similar in size, weight and power to the E-flite Park 180.

Dimensions: 18mm dia, 13.25mm long; weight: 9gm; shaft size: 2mm. Idle current (Io) = 0.5A at 10V, max current = 7.5A. Supplied with prop adapter and mounting screws. Recommended prop for 2S is 4x2.5 to 5x4.3.

An excellent motor for planes up to 220 grams (8 oz) using 2 li-poly cells. Very lightweight at 19 grams including integral prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and integral firewall mount. Great for small 3D planes weighing around 6 oz, or aerobatic planes up to 8 oz. Use with a 10 Amp brushless ESC and small 7.4V lithium batteries in the 400mah - 800mah range. Also known as A-2812/14 (28x12 are the outside dimensions, 22x04 is the stator dimension).

The motor features a 3mm hardened steel shaft, dual ball bearings, integral prop saver for APC E props and integral firewall mount flange. Note that the prop saver is sized for APC props. GWS props will need some modification to fit properly. Countersunk mounting holes have 31mm spacing on centers. This motor is also known as A2812-14 which are the outer dimensions, 2204 are the dimensions of the stator.

A powerful high RPM (2200Kv) motor for high-speed flying wings, prop jets, or other planes up to 100 grams (35 oz) using 2 or 3 li-poly cells. These motors are well established and been around for a while, sold under several brands; also known as A2212-6 which are the dimensions of the stator.

Dimensions: 27.7mm dia, 26.3mm long; weight: 50gm; shaft size: 3.17mm. Supplied with prop adapter and mounting screws. The recommended prop for use with a 3S LiPo is 8x4.

A tiny but powerful motor, 18mm diameter and 8gm.

Max Power:	40 W
Max Current:	5 A
Weight:	8 gm
Diameter:	18 mm
Shaft Size:	2 mm
Recommended Prop:	2S: 4x2.5 - 5x3

A small but powerful outrunner for parkflyers.

Specification: Max Power: 80 W Max Current: 9 A Weight: 26 gm Diameter: 23 mm Shaft Size: 3 mm Recommended Prop: 2S: 8x4, 3S: 7x3.5

Performance Data: Prop Battery Current (A) Thrust (gm) 7x3.5 2S 4.2 230 7x3.5 3S 7.5 430 8x4 2S 6.8 330 8x4.3 2S 7.5 340