These tiny C18 outrunner motors truly are the next generation in small, lightweight electric flight. Weighing less than 13g including 2mm gold connectors, they bring with them a whole host of possibilities.

These fill the gap between pager motor/actuator setups & the more traditional 2205/CDROM size brushless power plant. Capable of flying any model with an all up weight in the 70-150g range. They come complete with an integrated prop saver at one end & traditional shaft at the other. Your also get a lightweight collet adaptor, a backmount and fitted 2mm gold connectors.

Max current:	6.5A
KV:	2900 RPM/V
Size:	18mm dia, 15mm long
Weight:	13g
Shaft dia:	2mm
Recommended cell count:	2s Lipo
Recommended prop:	Up to 7x5, GWS 5x3 pulls 4A, GWS 6x3 pulls 5A

Max current:	4A
KV:	2000 RPM/V
Size:	18mm dia, 15mm long
Weight:	13g
Shaft dia:	2mm
Recommended cell count:	2-3s Lipo
Recommended prop:	Up to 7x5, GWS 7x3.5 2.7A (7.2V), GWS 5x3 2.7A (10V), GWS 6x3 3.8A (10V)

The C22 series motors are the next size up from the tiny C18 motors. They are an ideal choice for many indoor, parkfly & scratch built designs where you are trying to keep the weight to a minimum. Despite their small size they pack plenty of power & come complete with integral prop saver, collet adaptor, backmount and fitted 2mm gold connectors.

Max current:	7.5A
KV:	2850 RPM/V
Size:	22mm dia, 14mm long
Weight:	16g
Shaft dia:	2mm
Recommended cell count:	2s Lipo
Recommended prop:	7x5

Max current:	4.0A
KV:	2280 RPM/V
Size:	22mm dia, 14mm long
Weight:	16g
Shaft dia:	2mm
Recommended cell count:	2-3s Lipo
Recommended prop:	Up to 7x5

Max current:	8.0A
KV:	1330 RPM/V
Size:	22mm dia, 20mm long
Weight:	28g
Shaft dia:	2mm
Recommended cell count:	2-3s Lipo
Recommended prop:	Up to 8x4