Accessories
Switch Harness with Charging Socket A standard switch harness with JR/Hitec/Futaba connectors for turning your model on and off. Has shielded charging socket. £4.75
GWS V-Tail/Delta Mixer Unit for receivers. A very tiny unit that plugs into two outputs of the receiver. Gives the required operation of servos for V tail aircraft. Can also be used to combine elevator and aileron effect from the single control surfaces on Delta wing aircraft. Has also been used on strip ailerons of high performance gliders offering small amounts of 'up' or 'down' on both ailerons to give high penetration into wind or flap type extra lift. Comes completely ready to use! Manufactured by GWS - Excellent value at £8.95
Futaba Trainer Lead A lead to connect two Futaba transmitters so that your instructor can take control without having to prise the transmitter from your grasp. Particularly valuable when learning to land! This lead has two older style round 'DIN' plugs and does not suit the new Futaba square plug. £4.95
JR Trainer Lead as above but to link two JR transmitters. £4.50
Servo Leads we can make servo leads to your specification, or use higher current wire if you drive very large servos. Standard Leads £1.10, Extra long 20" leads £1.70, Bare plug only 50p
JST Servo Lead A 160mm servo lead with a small white JST connector to mate with the connectors on the Blue Arrow R3P4-J receiver. The lead has a JST connector at one end and bare wires at the other end. £1.25
